Become a Site Supporter and Never see Ads again!

Author Topic: V3 battery  (Read 33474 times)

0 Members and 1 Guest are viewing this topic.

Offline Rob D.

  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 3709
  • Gender: Male
V3 battery
« on: August 10, 2016, 06:29:44 PM »
I've been using two Impact (BPD-8000) batteries to power my V3 for about 8 years now. They've recently become unreliable but I've gotten my monies worth no doubt. What is a replacement recommendation?

Offline fsulloway

  • Trade Count: (28)
  • Taperssection All-Star
  • ****
  • Posts: 1765
  • Gender: Male
Re: V3 battery
« Reply #1 on: August 10, 2016, 09:06:28 PM »
You could use the same batteries as you do for your 744 if you want to. That's what I use for my V3. Just wire your cable for the V3 to a sled like the 744 batts slide in to. Very simple to wire up or you could have one of our TS cable guys do it. For me it was a no brainer since I had a few batteries for my 722 and they're relatively inexpensive.

schoeps ccm4's, mk4v, mk2h, mk41
AKG ck62, ck63, ck61
Nbob/pfa, Naiant/pfa
SD 10T

"Wilmington, North Carolina....Let us hear your motherf***in' pride!" Patterson Hood 12-09-04

"Just About Unwound From Chasing Down The Sound"

Offline Brian G

  • Trade Count: (11)
  • Taperssection All-Star
  • ****
  • Posts: 1670
  • Gender: Male
  • Yeah I'm an AKG slut....
Re: V3 battery
« Reply #2 on: August 11, 2016, 10:11:47 AM »
I have been using a Naztech BP15000 with my V3.
Mics: AKG c480b's, c460b's, c452eb's ( A60's, A51's ,A61's CK61, CK63, CK1, CK3 CK22, CK8), AKG C414 XLII/ST, AKG CK1x, CK3x M46,  Church Audio CA-11 ( Card and Omni)
Cables: Segue Dogstar Cables, Darktrain Silver Cables, Canare Starquad Cables
Pres: Lunatec V3, Naiant BiggerBox, Edirol UA-5, CA-9100 
Recorders: Sound Devices Mixpre 10II, Mixpre-6, Sony M10, Sony D50 ,Sony PCM-A10, Tascam DR-100mkii,Tascam DR-40, Edirol R-44
Playback: Fiio X5 v2, Fiio A3 v2, AKG 240MKII, AKG Y50BT

Offline dactylus

  • Site Supporter
  • Trade Count: (62)
  • Needs to get out more...
  • *
  • Posts: 5992
  • Gender: Male
  • Maplewood, MN
Re: V3 battery
« Reply #3 on: August 13, 2016, 10:19:16 AM »
Where did you obtain the 744-like sled?

I too have a Naztech PB15000 to use with my V3.


You could use the same batteries as you do for your 744 if you want to. That's what I use for my V3. Just wire your cable for the V3 to a sled like the 744 batts slide in to. Very simple to wire up or you could have one of our TS cable guys do it. For me it was a no brainer since I had a few batteries for my 722 and they're relatively inexpensive.



« Last Edit: August 14, 2016, 11:28:46 AM by dactylus »
hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

Offline fsulloway

  • Trade Count: (28)
  • Taperssection All-Star
  • ****
  • Posts: 1765
  • Gender: Male
Re: V3 battery
« Reply #4 on: August 13, 2016, 06:35:37 PM »
The sled comes from the wall chargers used to charge those type batteries. Got mine off ebay for less than $5. The sled attaches to the part that sticks in the wall. You unscrew the back and solder your cable to the contacts. Wish I had taken pics but it was quite simple and I'm not that handy with an iron.
schoeps ccm4's, mk4v, mk2h, mk41
AKG ck62, ck63, ck61
Nbob/pfa, Naiant/pfa
SD 10T

"Wilmington, North Carolina....Let us hear your motherf***in' pride!" Patterson Hood 12-09-04

"Just About Unwound From Chasing Down The Sound"

Offline dactylus

  • Site Supporter
  • Trade Count: (62)
  • Needs to get out more...
  • *
  • Posts: 5992
  • Gender: Male
  • Maplewood, MN
Re: V3 battery
« Reply #5 on: August 14, 2016, 11:30:30 AM »
The sled comes from the wall chargers used to charge those type batteries. Got mine off ebay for less than $5. The sled attaches to the part that sticks in the wall. You unscrew the back and solder your cable to the contacts. Wish I had taken pics but it was quite simple and I'm not that handy with an iron.

Thanks!
hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

Offline Rob D.

  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 3709
  • Gender: Male
Re: V3 battery
« Reply #6 on: August 16, 2016, 01:12:56 PM »
Thanks for all the recommendations! I ended up buying Naztech BP15000 for $83.50 on eBay. Now I need the get the interconnect between the battery and the V3. Naturally, the one I've used for the Impact batteries won't fit. It's been many years now but I think Maybe Ted (or Darktrain?) made it? Where has others gotten their's?

Offline Brian G

  • Trade Count: (11)
  • Taperssection All-Star
  • ****
  • Posts: 1670
  • Gender: Male
  • Yeah I'm an AKG slut....
Re: V3 battery
« Reply #7 on: August 16, 2016, 01:42:30 PM »
Thanks for all the recommendations! I ended up buying Naztech BP15000 for $83.50 on eBay. Now I need the get the interconnect between the battery and the V3. Naturally, the one I've used for the Impact batteries won't fit. It's been many years now but I think Maybe Ted (or Darktrain?) made it? Where has others gotten their's?

Ted made mine.
Mics: AKG c480b's, c460b's, c452eb's ( A60's, A51's ,A61's CK61, CK63, CK1, CK3 CK22, CK8), AKG C414 XLII/ST, AKG CK1x, CK3x M46,  Church Audio CA-11 ( Card and Omni)
Cables: Segue Dogstar Cables, Darktrain Silver Cables, Canare Starquad Cables
Pres: Lunatec V3, Naiant BiggerBox, Edirol UA-5, CA-9100 
Recorders: Sound Devices Mixpre 10II, Mixpre-6, Sony M10, Sony D50 ,Sony PCM-A10, Tascam DR-100mkii,Tascam DR-40, Edirol R-44
Playback: Fiio X5 v2, Fiio A3 v2, AKG 240MKII, AKG Y50BT

Offline jb63

  • Site Supporter
  • Trade Count: (31)
  • Taperssection Member
  • *
  • Posts: 957
  • Gender: Male
  • if not now when?
Re: V3 battery
« Reply #8 on: September 13, 2016, 03:31:52 PM »
The Memorex DVD battery I use for my V3 which is heavy as hell has finally given up holding a charge. How much does that 744 sled weigh and how long does the charge last?
once again, lost in all the noise

Offline jb63

  • Site Supporter
  • Trade Count: (31)
  • Taperssection Member
  • *
  • Posts: 957
  • Gender: Male
  • if not now when?
Re: V3 battery
« Reply #9 on: November 20, 2016, 07:26:56 PM »
Before i look for another DVD to power my V3, has anyone found anything smaller they recommend?

Thanks!
once again, lost in all the noise

Offline fsulloway

  • Trade Count: (28)
  • Taperssection All-Star
  • ****
  • Posts: 1765
  • Gender: Male
Re: V3 battery
« Reply #10 on: November 22, 2016, 05:43:06 PM »
The Memorex DVD battery I use for my V3 which is heavy as hell has finally given up holding a charge. How much does that 744 sled weigh and how long does the charge last?

sled is super light, less than 10 oz I'm sure. Runtime depends on the battery. I use a 7.4v 7200 mah battery and I run it for 3hr shows no problem. Haven't really tested it to see how long it would go.

here's a pic of the battery, sled, and a Tekkeon for the size comparison.

schoeps ccm4's, mk4v, mk2h, mk41
AKG ck62, ck63, ck61
Nbob/pfa, Naiant/pfa
SD 10T

"Wilmington, North Carolina....Let us hear your motherf***in' pride!" Patterson Hood 12-09-04

"Just About Unwound From Chasing Down The Sound"

Offline jb63

  • Site Supporter
  • Trade Count: (31)
  • Taperssection Member
  • *
  • Posts: 957
  • Gender: Male
  • if not now when?
Re: V3 battery
« Reply #11 on: November 22, 2016, 11:23:47 PM »
Thanks!
I will now start the troublesome task of hunting down those parts!
once again, lost in all the noise

Offline fsulloway

  • Trade Count: (28)
  • Taperssection All-Star
  • ****
  • Posts: 1765
  • Gender: Male
Re: V3 battery
« Reply #12 on: November 23, 2016, 07:32:09 AM »
Thanks!
I will now start the troublesome task of hunting down those parts!

Less than 10 min on ebay and you should have batteries and a sled. Tgakidis or darktrain can make the cable.


this should work. You'll need a second charger to charge your batteries though.
http://www.ebay.com/itm/Kastar-Battery-and-Normal-Charger-Kit-for-Sony-NP-F975-NP-F970-NP-F960-NP-F950-/252592505919?var=&hash=item3acfafc43f:m:mueSS7gcqzE9IRqNMNnL05Q

here's a few pics of how it works.
Here's the unit all together.


The sled slides out.


with the sled out and flipped over.
take out 4 screws. there's two wires in there that connect to the two silver tabs you see in the pic. The tabs will be removed.
you'll take your cable that goes from the V3 and solder positive to pos and neg to neg.
I filled the case with some hot glue to stabilize the cable then put the cover back on the sled.
I'm sure one of the cable guys would do this all for you if you shipped them the sled.
« Last Edit: November 23, 2016, 10:06:30 AM by fsulloway »
schoeps ccm4's, mk4v, mk2h, mk41
AKG ck62, ck63, ck61
Nbob/pfa, Naiant/pfa
SD 10T

"Wilmington, North Carolina....Let us hear your motherf***in' pride!" Patterson Hood 12-09-04

"Just About Unwound From Chasing Down The Sound"

Offline jb63

  • Site Supporter
  • Trade Count: (31)
  • Taperssection Member
  • *
  • Posts: 957
  • Gender: Male
  • if not now when?
Re: V3 battery
« Reply #13 on: November 24, 2016, 11:12:42 PM »
Wow! I will jump on that and try to make one!

Thanks! Thanks! Thanks!
once again, lost in all the noise

Offline jb63

  • Site Supporter
  • Trade Count: (31)
  • Taperssection Member
  • *
  • Posts: 957
  • Gender: Male
  • if not now when?
Re: V3 battery
« Reply #14 on: December 01, 2016, 07:06:28 PM »
So I ordered those parts and batteries and they arrived today. I figured there would be no way that I'd be able to pull this off but it seems pretty straightforward. There are even symbols for pos and neg on the front by the poles.

Its a pretty bulky form factor compared to the DVD battery when trying to cram it into a bag with the V3 but certainly less weight. Kind of like the difference between a CAugly and a CA9200. One fits better but its bigger.

Here's my question:
Do I keep the square piece that's soldered to the connections or remove it?
I assume that it is for the charger part and not important, but who knows?


once again, lost in all the noise

 

RSS | Mobile
Page created in 0.087 seconds with 40 queries.
© 2002-2024 Taperssection.com
Powered by SMF