Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: stober on January 19, 2005, 08:06:55 AM

Title: sonosax sx-m2
Post by: stober on January 19, 2005, 08:06:55 AM

hey now! I run dpa 4023's>V3>Da-p1  .I  like the tapes I pull especially outdoors with this combo.But I'm looking for something warmer to run indoors.I'm wondering if the sonosax is considerd  warm or transparent.If anybody out there has any imput on a warm pre for dpa's let me know.I used to have a mp-2 but sold it years ago after the v3 purchase.I wish I stilll had it for indoor shows.Very stealthy and a warm pre at that.i used to run AKG 391 and MBHO with my mp-2 and really like the tapes.

Title: Re: sonosax sx-m2
Post by: jpschust on January 19, 2005, 10:00:42 AM

warm pre for the dpas = oade m148.

Title: Re: sonosax sx-m2
Post by: Tim on January 19, 2005, 10:07:30 AM

Quote from: Jonny Tapealot on January 19, 2005, 10:00:42 AM

warm pre for the dpas = oade m148.

Title: Re: sonosax sx-m2
Post by: twoodruff on January 19, 2005, 10:44:04 AM

Quote from: Tim on January 19, 2005, 10:07:30 AM

Quote from: Jonny Tapealot on January 19, 2005, 10:00:42 AM

warm pre for the dpas = oade m148.

Title: Re: sonosax sx-m2
Post by: eric.B on January 19, 2005, 10:54:43 AM

The sxm2 is "warmer" than the v2..  if 'warmer' is the word you want to use.

I like to think the sxm2 is darker and not as tight as the v2..  or better yet, the v2 is 'cleaner' and  'less forgiving'..

If you are looking for something 'more forgiving' for indoor stuff, the sxm2 might work for you.

Title: Re: sonosax sx-m2
Post by: marc0789 on January 19, 2005, 12:19:53 PM

cbd runs 4022>sx>mme most of the time. sx is warmer than the v2, maybe a touch *fuzzy*, to my ears lies somewhere between a 148 and v2. warm for a non-transformer based pre. but running a v3 behind it would cut much of that, I think.

and I really like his tapes. prefer them to his 4022>v2>mme most of the time.

Title: Re: sonosax sx-m2
Post by: brianp on January 19, 2005, 01:21:56 PM

whaddup Brent? you are welcome to use my Sonosax anytime you want, just give me a ring.

Title: Re: sonosax sx-m2
Post by: stober on January 20, 2005, 07:01:00 PM

Quote from: brianp on January 19, 2005, 01:21:56 PM

whaddup Brent? you are welcome to use my Sonosax anytime you want, just give me a ring.

  That I will do !

Title: Re: sonosax sx-m2
Post by: silentmark on January 24, 2005, 04:20:26 PM

Sonosax, warm or dark. I'd rather have the sax over the v2, again it is what you prefer ...

Title: Re: sonosax sx-m2
Post by: heath on January 25, 2005, 12:04:41 PM

Quote from: twoodruff on January 19, 2005, 10:44:04 AM

Quote from: Tim on January 19, 2005, 10:07:30 AM

Quote from: Jonny Tapealot on January 19, 2005, 10:00:42 AM

warm pre for the dpas = oade m148.

Title: Re: sonosax sx-m2
Post by: stober on January 28, 2005, 07:48:11 PM

Quote from: Jonny Tapealot on January 19, 2005, 10:00:42 AM

warm pre for the dpas = oade m148.

I havent seen one for sale in a long time.anybody out there have one sitting around ???Does Doug still make these?

Title: Re: sonosax sx-m2
Post by: Tim on February 02, 2005, 07:09:48 PM

yes Doug still makes the m148.

he has not made the m248's in a few years though