Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: Big Muff on October 22, 2003, 01:33:02 AM

Title: Stereo techniques?
Post by: Big Muff on October 22, 2003, 01:33:02 AM

Hi-
  Newby here, and my first post on TS. I've Been paying attention and patching in for a few years and just finished getting a rig together not so long ago... Nak 300's+cp1,2,and4> MX-100 (w/center channel "line level" mod for sbd matrix) > Oade SBM-1> Sony D3.. So far so good!
  I've noticed more recently that the XY, ORTF, DIN, etc. techniques aren't being used much anymore. Just for example, I saw a local taper using 4011's,  pointing them directly at the stacks.. I've noticed similar set-ups ever since..
 Now i usually go ortf when up front, din when I'm behind the sbd.. Tried this "direct" method at an outdoor show once.. Not bad at all.
 So my questions are, what technique is it called? Why is it preffered over the others? And what diferences would be expected between running it at clubs and larger outdoor venues?
Thanks!
-Mike


 

Title: Re:Stereo techniques?
Post by: sexymexi on October 22, 2003, 02:43:27 AM

good question, and welcome man, a big +T to ya. hope this helps ya out..

Title: Re:Stereo techniques?
Post by: BCostigan on October 22, 2003, 07:52:59 AM

The method your speaking of...aiming the mics at the outside edge of the stacks, is commonly referred to as the "Nutter Tecnique".  :P

 A detailed answer on the above can be found at:
http://www.sonicsense.com/micplace.htm


Nice rig!  +T for coming to the right place.  As for mic configs and all that.... trust your ears.  

Title: Re:Stereo techniques?
Post by: blu666z on October 22, 2003, 06:41:02 PM

Quote from: BCostigan on October 22, 2003, 07:52:59 AM

A detailed answer on the above can be found at:
http://www.sonicsense.com/micplace.htm
 

Most informative page I read in a while.  Nice link.

+T

-Kevin

Title: Re:Stereo techniques?
Post by: Sean Gallemore on October 24, 2003, 06:12:39 AM

wanna hear about the schwilly technique?