Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: beatkilla on September 07, 2015, 07:07:38 PM
-
I seem to recall an old thread with someone who said they had repaired several of these,i cant find that thead,they seemed to know about some being reverse polarity etc.Hit me up if thats you please.
-
I have fixed a couple, these are notorious for solder points getting stressed from the resistors being packed in there to tight, not sure if that is your issue? The breaks can be hard to spot usually on the underside of the larger resistor
-
Pm sent
-
I seem to recall an old thread with someone who said they had repaired several of these,i cant find that thead,they seemed to know about some being reverse polarity etc.Hit me up if thats you please.
I'm sure you know this, but if your mics have a 1/8 plug you can skip the battery box and go mic in into the M10. Guysonic says the M10 and D50 power his mics perfectly, so I wouldn't be surprised if the D100 did as well. I've never used a battery box with mine. Have made great sounding recordings with both an M10 & D50.
-
Im using At 853,and Countryman b3 with this box but yes i do run the Sonic Studios mics direct to the m10 and d100
-
Send it in for a free checkup.
If it has a switch, spray it with contact cleaner and work the switch back and forth.
If anyone can repair it, it's us.
-
I actually emailed you before posting this thread and never received a response.
-
If we received it, we would have responded.
Please use the email address: moskowit@core-sound.com .