I have just found out the price of the new Rycote mounts.
In the UK they will retail for
£30 +VAT
In the USA the likely price will be
$79.
All the In-Vision mounts (INV-1 to INV-8 inclusive) will be the same price.
Also - for info. This was posted on a UK Forum by a Beta Tester of the mounts:-
I've also been beta testing these Rycote In-Vision mounts (and I'm very pleased to say that one of my suggestions has been implemented in the production version).
The design is as stunningly ingenious as it is innovative and unique -- and it can be scaled very easily to match a wide variety of mic sizes and weights. The basic design has already been proven in the S-series shockmount and windshield system for location sound applications.
More to the point - I've seen the vibration measurement plots, and these mounts provide very good attenuation/isolation down to around 30Hz in most cases, which is significantly better than a lot of manufacturer's mounts.
The mount also includes an extremely effective cable clamp that ensures the performance is maintained regardless of cable type in use.
In the few cases where the In-Vision design fails to exceed the performance of the manufacturers' own mounts, they still have a significant advantage in that they cost a fraction of the price! The way they are made is very simple, which keeps the cost very low indeed, and the material used is virtually indestructible too. No rubber bands or elastic cords to replace. No adjustments necessary.
The first release of the range is intended for miniature and compact mics, plus most capacitor pencil mics. There are eight models and you can see the specs here.
There are three for miniature mics, three for compact mics, and two for longer, larger pencil mics. The design is optimised for end-fire mics, and as a result the performance is not quite as good for side-address figure-eight mics -- although it is still better than every other commercial mount out there. I believe there is also a design on the drawing board for a version optimised for fig-8s, but the potential sales would be so small that it is not high on the production priority list at the moment.
Later this year there will be a larger design using the same principle but in very different way to support side address large diaphragm mics. That will be exciting...
I really do believe these Rycote studio shockmounts are going to become standard equipment for everyone within a few years. They are that effective and cost-effective. Like John, my order for enough to service all my small diaphragm mics is already lodged with Rycote!
Topic: Recommend me some new shock mounts for my AKG 480s (Read 11780 times)