We are already starting to put it together. :
Flemma - Input 1: mic vocal
Flemma - Input 2: mic drum box
Flemma - Line out R: goes to MUAI5
Flemma - Input 3/4: I don't know why she put a red circle here
MUAI - Input HiZ: guitar
MUAI - Input mic: output of Flemma
Jefflester, can she connect a guitar to Flemma input 3? Input 3/4 has instructions below. If it is possible, then Dan just plugs the guitar into the Flemma instead MUAI, set the levels and the problem is solved.
Input 3 & Input 4: Dual-channel stereo 6.35mm TS input jack or line signal for connecting instruments (keyboard,synthesizer). For stereo setup, please connnect both Input 3 and Input 4. For mono setup, please connect Input 3 only.Edit: I looked in detail in the manual. It looks like that Input 3/4 is not for guitar hi impedance signal. You would need to use a di box (or e.g. old edirol UA5) to convert it to line level.
"My guitar goes to the guitar input on top there! and then I have a 3/4 cable that runs from the output jack on the board to that mic input there on top! If that makes sense."
A small suggestion for improvement, if others approve. Flemma is connected to MUAI via mic input. It would be better if she connect it via mp3 input (line level).