Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: Teen Wolf Blitzer on October 19, 2006, 01:52:39 PM
-
I'm looking for another pair of mics. I am able to get all these within the 7-8 hundred range. Which would you choose? Why?
I currently have TLII's and 451's. Mostly record acoustic music.
Neumann KM 184's
MBHO 603/ka200n
AKG 460 ck61's
SD LSD2
Peluso's
What I really want is ck1's with the actives and some 460 bodies. How hard are those actives to really find? How many run them here? How did they find em?
-
Acoustic music, eh?
You should try the Beyerdynamic MC930s. Might make you forget about everything else on your list. ;D
-
I'm not familiar with those. Pretty good huh? I'd have to find a used pair as most of the new pairs seem to be in the 1000 range.
-
I'm not familiar with those. Pretty good huh? I'd have to find a used pair as most of the new pairs seem to be in the 1000 range.
Good luck finding them used. People that buy them tend to keep them. ;D
However...Warren Dent can help you out with a very nice price: http://www.frontendaudio.com/Beyerdynamic_MC_930_Cardioid_True_Condenser_Microp_p/1563.htm (http://www.frontendaudio.com/Beyerdynamic_MC_930_Cardioid_True_Condenser_Microp_p/1563.htm)
-
Cool. That's in my range. Hmmmmmm.
-
A good thread to start with: http://www.gearslutz.com/board/showthread.php?t=80355 (http://www.gearslutz.com/board/showthread.php?t=80355)
Not much out there yet, but I have yet to find anything but the highest praise for this particular mic. Call Warren and pick his brain. I'm sure he'll shoot it to you straight, and maybe even give you a couple other choices you hadn't thought about...
-
You may also want to look at the Microtech Gefell M300 mics. Fixed cardioid capsules, but nothing sounds better for the money. They are within the price range of the mics in which you are looking and sound fantastic.
-
They are within the price range of the mics in which you are looking and sound fantastic.
No they aren't, unless you only want one of them
(they do sound great though).
-
What I really want is ck1's with the actives and some 460 bodies. How hard are those actives to really find? How many run them here? How did they find em?
There are 4 or 5 of us that run them. It took me about 2 years to get them. After looking about a year I actually was first in line for teh one's Goose was running, but couldnt swing the cash. But just a couple of months ago I was able to get some that were offered here. Turns out they were the same ones I almost got the year before. I love them and have been very happy with what Ive taped so far. Last two times were onstage for acoustic bands.
-
acoustic music??
ribbon mics. without question. SU-PER-IOR for acoustic applications!
cascade fatheads (http://www.cascademicrophones.com/cascade_FAT%20HEAD.html) are awesome, and cheap(300 for a pair) and leaves you some dough to get a nother pair of mics(fwiw, the legendary acoustic/classical engineer/producer tony faulkner uses Rode NT-1s..those are about 300 for the pair too)
OR audio technica 4050 pair..
I say go for something different...something that everyone and their mother on the board isnt using..if noone tries new products tapers will be stuck in a microphone time warp. (kudos to the folks that tried berliners and milabs)..
if you like the sound of breaking glass, go for the km184s! :P I despise those microphones.
-
I say go for something different...something that everyone and their mother on the board isnt using
Yup. That's exactly why I recommended the MC930's in the first place. Dare to be different, dammit! :-*
-
I say go for something different...something that everyone and their mother on the board isnt using
Yup. That's exactly why I recommended the MC930's in the first place. Dare to be different, dammit! :-*
just dont order em from france. :P :P :P :P :P :P :P :P
-
I say go for something different...something that everyone and their mother on the board isnt using
Yup. That's exactly why I recommended the MC930's in the first place. Dare to be different, dammit! :-*
just dont order em from france. :P :P :P :P :P :P :P :P
Well...those are actually 803's, but...point taken. :P +t
-
Thanks for the input guys! Keep it coming. Those Beyers seem pretty nice. Noticed the frequency range of 40-20 as opposed to 20-20 like most recording mics. Is that an issue?
Also Teddy nice on the ribbon recommendation. I have thought about those for awhile although don't know a whole lot about ribbon mics. Are they more delicate than regular mics? Inside only type of thing?
I was kinda leaning toward a sd pair so I can have the option of having a smaller setup when I'd like to but now I'm all thinking ribbon! Hmmm. Decisions decisions.
-
Thanks for the input guys! Keep it coming. Those Beyers seem pretty nice. Noticed the frequency range of 40-20 as opposed to 20-20 like most recording mics. Is that an issue?
Also Teddy nice on the ribbon recommendation. I have thought about those for awhile although don't know a whole lot about ribbon mics. Are they more delicate than regular mics? Inside only type of thing?
I was kinda leaning toward a sd pair so I can have the option of having a smaller setup when I'd like to but now I'm all thinking ribbon! Hmmm. Decisions decisions.
man, once you hear ribbons...youll be a changed man! they are a bit more delicate, but if you take care of your gear, no worries. Dont blow in em, dont send em phantom, and dont yell in them...the sound...man..so smooth and "earthy"...would make wingsing sound like maria callas!
there are no active electronics in ribbon mics..so the noise is non-existant(unless it comes fromyour preamp or signal)
http://www.royerlabs.com/faq.html
-
Thanks for the input guys! Keep it coming. Those Beyers seem pretty nice. Noticed the frequency range of 40-20 as opposed to 20-20 like most recording mics. Is that an issue?
no
many ribbons have 40-18 response. some vintage neumanns (km54's, etc.) are 40-18 as well. it's not really a factor.
-
no phantom? How are they powered? Where would placement of these mics be appropriate? I'm afraid even onstage in front of an oldtime band might be too loud?
-
though ribbons sound excellent, I don't believe they are practical for out applications (as live PA driven tapers). I do own a ribbon but that is in addition to my other mics. Ribbons are fragile, limited to a single pattern (fig 8) and require high gain. If you want a practical all around mic, go with one of the sd mics mentioned above.
Don't get me wrong, if you have other mics in your arsenal, try a ribbon out. But if you want a mic with versatility, go with a condensor.
Edited to add; Oooops, see by your first post you have other mics. If you know your situation for taping, try out the ribbons ;D
-
I'm looking for another pair of mics. I am able to get all these within the 7-8 hundred range. Which would you choose? Why?
I currently have TLII's and 451's. Mostly record acoustic music.
Neumann KM 184's
MBHO 603/ka200n
AKG 460 ck61's
SD LSD2
Peluso's
What I really want is ck1's with the actives and some 460 bodies. How hard are those actives to really find? How many run them here? How did they find em?
for acoustic, id def go w/ the mbho's, id go actives if i did
otherwise, just for something diff id try the peluso's, they sound good to my ears but i also havent heard many tapes with them
for ease of use the lsd2 would be the shizzle too :)
but for acoustic stuff, i have always loved the mbho's personally
one of my fav tapes ever was from keller incident at the first bonnaroo in 2002, and the tapes SMOKE every other source IMO
-
he said acoustic recording... for acoustic recording..aint much gonna top a ribbon, sound wise...and not all ribbons are figure 8 .
and they are dirt cheap(the fatheads..300 a pair!) so you could get another pair of mics on top of that!
and besides..the mics he listed have all been used over and over and over(cept the pelusos)...the community needs to be on the bleedin edge man... :) who wants to use what everone else is using??? ;D ;D
though ribbons sound excellent, I don't believe they are practical for out applications (as live PA driven tapers). I do own a ribbon but that is in addition to my other mics. Ribbons are fragile, limited to a single pattern (fig 8) and require high gain. If you want a practical all around mic, go with one of the sd mics mentioned above.
Don't get me wrong, if you have other mics in your arsenal, try a ribbon out. But if you want a mic with versatility, go with a condensor.
Edited to add; Oooops, see by your first post you have other mics. If you know your situation for taping, try out the ribbons ;D
-
WTF? The mics shot up 200 bucks in 3 hours. strange... They were 799 earlier.
http://www.frontendaudio.com/Beyerdynamic_MC_930_Cardioid_True_Condenser_Microp_p/1563.htm
-
he said acoustic recording... for acoustic recording..aint much gonna top a ribbon, sound wise...and not all ribbons are figure 8 .
Mark, maybe you can clarify. My assumption was that you record amplified acoustic music (bluegrass through a PA)...
-
no phantom? How are they powered? Where would placement of these mics be appropriate? I'm afraid even onstage in front of an oldtime band might be too loud?
Ribbons are technically dynamic mics, not condensers.
-
Usually onstage mics and a board is what I would grab. Bluegrass/oldtime music. But I do also see bands like Yonder. And on occasion some Critters Buggin. That type of thing.
-
he said acoustic recording... for acoustic recording..aint much gonna top a ribbon, sound wise...and not all ribbons are figure 8 .
and they are dirt cheap(the fatheads..300 a pair!) so you could get another pair of mics on top of that!
and besides..the mics he listed have all been used over and over and over(cept the pelusos)...the community needs to be on the bleedin edge man... :) who wants to use what everone else is using??? ;D ;D
though ribbons sound excellent, I don't believe they are practical for out applications (as live PA driven tapers). I do own a ribbon but that is in addition to my other mics. Ribbons are fragile, limited to a single pattern (fig 8) and require high gain. If you want a practical all around mic, go with one of the sd mics mentioned above.
Don't get me wrong, if you have other mics in your arsenal, try a ribbon out. But if you want a mic with versatility, go with a condensor.
Edited to add; Oooops, see by your first post you have other mics. If you know your situation for taping, try out the ribbons ;D
I'm in total agreement about trying different mics. ;D Guess my point was if I was to have one set of mics, condensors would be the only option, sd's at that. But as I edited, I see he said he has other mics so Ribbons would be great alternative to try out, especially at the price point to get into them. For onstage purposes, they are ohh so silky smooth
-
Anyone familiar with these?
http://cgi.ebay.com/Matched-Pair-Neumann-Gefell-PM750-cardiod-condenser-mic_W0QQitemZ220038640760QQihZ012QQcategoryZ133011QQrdZ1QQcmdZViewItem?hash=item220038640760
I know they're a little out of my range but I might be able to swing it.
-
Anyone familiar with these?
http://cgi.ebay.com/Matched-Pair-Neumann-Gefell-PM750-cardiod-condenser-mic_W0QQitemZ220038640760QQihZ012QQcategoryZ133011QQrdZ1QQcmdZViewItem?hash=item220038640760
I know they're a little out of my range but I might be able to swing it.
yeah..if you have mains power access all the time..if not, yoll have to get them modded for p48(which isnt hard to do)..I am actually getting this done for two other folks here..
(http://www.sonicworld.de/bilder/vintage-mic/gefell-pm750-m750.jpg)
If I were you I would scope out a pair of the MV692 bodies, with m70 capsules or Um70 capsules..
those can be had for little money, and are great..
if you want to shop on ebay germany, i can act as middle man and ship to you..
-
like this..those can come with the
http://cgi.ebay.de/Neumann-Gefell-MV-692-pair-with-M94-PSU-and-cables_W0QQitemZ230039169134QQihZ013QQcategoryZ15198QQrdZ1QQcmdZViewItem
all the possible caps..
(http://i99.photobucket.com/albums/l292/thebullards/sms70.jpg)
-
he said acoustic recording... for acoustic recording..aint much gonna top a ribbon, sound wise...and not all ribbons are figure 8 .
and they are dirt cheap(the fatheads..300 a pair!) so you could get another pair of mics on top of that!
and besides..the mics he listed have all been used over and over and over(cept the pelusos)...the community needs to be on the bleedin edge man... :) who wants to use what everone else is using??? ;D ;D
though ribbons sound excellent, I don't believe they are practical for out applications (as live PA driven tapers). I do own a ribbon but that is in addition to my other mics. Ribbons are fragile, limited to a single pattern (fig 8) and require high gain. If you want a practical all around mic, go with one of the sd mics mentioned above.
Don't get me wrong, if you have other mics in your arsenal, try a ribbon out. But if you want a mic with versatility, go with a condensor.
Edited to add; Oooops, see by your first post you have other mics. If you know your situation for taping, try out the ribbons ;D
I used a old RCA mic on a gospel/folk group in Louisville, Kentucky with an audience of 19,000 people in attendance. It was the only mic on stage. I had one of the best most authentic acoustic sounds I have ever heard. There was 2 guitar players, 1 mando, a standup bass, and three vocals. They were all gathered around this one mic, the sound was so good I got goose bumps. The show was in the round. I am a firm believer in ribbon mics. The only thing I would say about them is, you better have a very quiet preamp to use with any ribbon mic for acoustic performance or recording. I was pretty scared that I would have feedback issues, but to be honest there was none. I turned up the fader I did not touch any eq on my console and the sound was there full as life.
-
Chris...USE PERIODS man...I like reading your posts, but they are hard to read because you dont punctuate.. :)
he said acoustic recording... for acoustic recording..aint much gonna top a ribbon, sound wise...and not all ribbons are figure 8 .
and they are dirt cheap(the fatheads..300 a pair!) so you could get another pair of mics on top of that!
and besides..the mics he listed have all been used over and over and over(cept the pelusos)...the community needs to be on the bleedin edge man... :) who wants to use what everone else is using??? ;D ;D
though ribbons sound excellent, I don't believe they are practical for out applications (as live PA driven tapers). I do own a ribbon but that is in addition to my other mics. Ribbons are fragile, limited to a single pattern (fig 8) and require high gain. If you want a practical all around mic, go with one of the sd mics mentioned above.
Don't get me wrong, if you have other mics in your arsenal, try a ribbon out. But if you want a mic with versatility, go with a condensor.
Edited to add; Oooops, see by your first post you have other mics. If you know your situation for taping, try out the ribbons ;D
I used a old RCA mic on a gospel/folk group in Louisville, Kentucky with an audience of 19,000 people in attendance it was the only mic on stage I had one of the best most authentic acoustic sounds I have ever heard There was 2 guitar players 1 mando a standup bass and three vocals around this one mic the sound was so good I got goose bumps. The show was in the round. I am a firm believer in ribbon mics. The only thing I would say about them is you better have a very quiet preamp to use with any ribbon mic for acoustic performance or recording. I was pretty scared that I would have feedback issues but to be honest there was none I turned up the fader I did not touch any eq on my console and the sound was there full as life.
-
Chris...USE PERIODS man...I like reading your posts, but they are hard to read because you dont punctuate.. :)
he said acoustic recording... for acoustic recording..aint much gonna top a ribbon, sound wise...and not all ribbons are figure 8 .
and they are dirt cheap(the fatheads..300 a pair!) so you could get another pair of mics on top of that!
and besides..the mics he listed have all been used over and over and over(cept the pelusos)...the community needs to be on the bleedin edge man... :) who wants to use what everone else is using??? ;D ;D
though ribbons sound excellent, I don't believe they are practical for out applications (as live PA driven tapers). I do own a ribbon but that is in addition to my other mics. Ribbons are fragile, limited to a single pattern (fig 8) and require high gain. If you want a practical all around mic, go with one of the sd mics mentioned above.
Don't get me wrong, if you have other mics in your arsenal, try a ribbon out. But if you want a mic with versatility, go with a condensor.
Edited to add; Oooops, see by your first post you have other mics. If you know your situation for taping, try out the ribbons ;D
I used a old RCA mic on a gospel/folk group in Louisville, Kentucky with an audience of 19,000 people in attendance it was the only mic on stage I had one of the best most authentic acoustic sounds I have ever heard There was 2 guitar players 1 mando a standup bass and three vocals around this one mic the sound was so good I got goose bumps. The show was in the round. I am a firm believer in ribbon mics. The only thing I would say about them is you better have a very quiet preamp to use with any ribbon mic for acoustic performance or recording. I was pretty scared that I would have feedback issues but to be honest there was none I turned up the fader I did not touch any eq on my console and the sound was there full as life.
I fixed it :P Now you can read it. I would not want to strain your brain with my post's.
-
Man, my feeble brain needs all the help it can get!
thanks brother!Chris...USE PERIODS man...I like reading your posts, but they are hard to read because you dont punctuate.. :)
he said acoustic recording... for acoustic recording..aint much gonna top a ribbon, sound wise...and not all ribbons are figure 8 .
and they are dirt cheap(the fatheads..300 a pair!) so you could get another pair of mics on top of that!
and besides..the mics he listed have all been used over and over and over(cept the pelusos)...the community needs to be on the bleedin edge man... :) who wants to use what everone else is using??? ;D ;D
though ribbons sound excellent, I don't believe they are practical for out applications (as live PA driven tapers). I do own a ribbon but that is in addition to my other mics. Ribbons are fragile, limited to a single pattern (fig 8) and require high gain. If you want a practical all around mic, go with one of the sd mics mentioned above.
Don't get me wrong, if you have other mics in your arsenal, try a ribbon out. But if you want a mic with versatility, go with a condensor.
Edited to add; Oooops, see by your first post you have other mics. If you know your situation for taping, try out the ribbons ;D
I used a old RCA mic on a gospel/folk group in Louisville, Kentucky with an audience of 19,000 people in attendance it was the only mic on stage I had one of the best most authentic acoustic sounds I have ever heard There was 2 guitar players 1 mando a standup bass and three vocals around this one mic the sound was so good I got goose bumps. The show was in the round. I am a firm believer in ribbon mics. The only thing I would say about them is you better have a very quiet preamp to use with any ribbon mic for acoustic performance or recording. I was pretty scared that I would have feedback issues but to be honest there was none I turned up the fader I did not touch any eq on my console and the sound was there full as life.
I fixed it :P Now you can read it. I would not want to strain your brain with my post's.
-
I'm looking for another pair of mics. I am able to get all these within the 7-8 hundred range. Which would you choose? Why?
I currently have TLII's and 451's. Mostly record acoustic music.
Neumann KM 184's
MBHO 603/ka200n
AKG 460 ck61's
SD LSD2
Peluso's
What I really want is ck1's with the actives and some 460 bodies. How hard are those actives to really find? How many run them here? How did they find em?
there's an auction for violet design black finger
http://cgi.ebay.com/VIOLET-DESIGN-BLACK-FINGER-MED-DIAPHRAGM-CONDENSER-MIC_W0QQitemZ130035730778QQihZ003QQcategoryZ41466QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
try and snipe it for cheap price and then buy the other black finget at odyssey pro sound for 250.
another underrated gem is the necvaton mc49 a pair could be had for 1000 bucks if you look around. :)
-
We were actually discussing the finger last night and contemplating a purchase! there are a couple on Ebay UK for about $300 each... ;D
I've been dying to hear the Violet Design mics myself. The Black Knight looked kind of cool too.
OK, I'm watching this one... >:D
-
We were actually discussing the finger last night and contemplating a purchase! there are a couple on Ebay UK for about $300 each... ;D
I've been dying to hear the Violet Design mics myself. The Black Knight looked kind of cool too.
OK, I'm watching this one... >:D
I/ we only own the dolly...it has a pretty sound ( for the price i bought it for). I should post a pic soon. ;D
-
Just a heads up on the Beyer mc930's. BH has their stereo pair listed for 999 but if you add it to the cart, you get a reduced price of 765. The catch is that they are special order so you have to wait a 3-4 weeks. This is gonna be the lowest I believe anywhere and won't last long. Price is going nowhere but up and quick.
-
someone won a pair of violet desgn fingers for 300 bucks..wow >:D >:D
anyone here? >:D >:D >:D
-
someone won a pair of violet desgn fingers for 300 bucks..wow >:D >:D
anyone here? >:D >:D >:D
wasnt me. I dont like ugly microphones. >:D
-
Dirk was eyeing these at one point. Whether or not he bought them............... ???
someone won a pair of violet desgn fingers for 300 bucks..wow >:D >:D
anyone here? >:D >:D >:D
-
Tapermark:
I have another recomendation for you. Since you already have a LD and a SD condensor pair, maybe try a pair of the small electret omni-directional microphones. They range in price from $19 each (Naiant Studio) to thousands of dollars (Earthworks) with many inbetween (Church Audio, Sound Professionals, Core Sound etc...). I find these microphones make very life like recordings and are often overlooked for various reasons.
I do, however, agree with Teddy, that it's hard to beat a ribbon microphone for acoustic music.
Chuck
-
Thanks for all the feedback guys. I decided to go vintage. Grabbed a pair of Microtech Gefell MV 692's w/ M70's! :0) I think I will get some ribbons but they are so cheap I will get some down the road. Really wanna try em. Cheers!
-
Thanks for all the feedback guys. I decided to go vintage. Grabbed a pair of Microtech Gefell MV 692's w/ M70's! :0) I think I will get some ribbons but they are so cheap I will get some down the road. Really wanna try em. Cheers!
Wise man. :)