Become a Site Supporter and Never see Ads again!

Author Topic: Where to get Neutrik Right Angle Screws  (Read 2406 times)

0 Members and 1 Guest are viewing this topic.

Offline gratefulphish

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1568
  • Gender: Male
  • Gone Tapin'
Where to get Neutrik Right Angle Screws
« on: October 14, 2009, 12:19:04 AM »
I don't know whether they grease them at the factory to fall out, but I seem to keep losing them, and cannibalizing other cables for the screws I need.  I am now out of extras, so are these available at specialty hardware stores, Rat Shack or elsewhere?  Otherwise, are there any cable builders out there with extras?  TIA

ETA that I did not see post below asking for same screw specs, but no one seems to know the exact size or where to get extras.
« Last Edit: October 14, 2009, 12:20:55 AM by gratefulphish »
4 channel: Neumann TLM-170R>Segue Dogstar>SD 722   2 channel: Neumann TLM-170R>Segue Dogstar>Lunatec V3>SD 722
               Linked to Lunatec V3>MT 24/96                                     (Hi-Ho Silver Interconnects)     

Other gear: AKG C451Es, Tascam DA-P1, Sony D-8

Offline goodcooker

  • Trade Count: (43)
  • Needs to get out more...
  • *****
  • Posts: 4638
  • Gender: Male
  • goes to 11
Re: Where to get Neutrik Right Angle Screws
« Reply #1 on: October 22, 2009, 04:47:41 PM »
I made some more stubbies and have a few more extras

Send me a pm if you want a couple.

A friend of mine is a Neutrik dealer....I'll ask him if it's possible to get a sack full of em....but I seriously doubt it.

Line Audio CM3/OM1 || MBHO KA500 hyper>PFA|| ADK A51 type IV || AKG C522XY
Oade Warm Mod and Presence+ Mod UA5s || Aerco MP2(needs help) || Neve Portico 5012 || Apogee MMP
SD Mixpre6 || Oade Concert Mod DR100mkii

pocket sized - CA11 cards > SP SB10 > Sony PCM A10

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

 

RSS | Mobile
Page created in 0.039 seconds with 30 queries.
© 2002-2024 Taperssection.com
Powered by SMF