Taperssection.com
Gear / Technical Help => Photo / Video Recording => Topic started by: vegeta_ban on July 06, 2010, 03:15:16 AM
-
Hey all,
The other night I was shooting a show with my pv-gs35 minidv camcorder when the thing overheated and shut off. It will not power on now, or eject the tape when attached to a power source. Do you guys know where i could get this camcorder repaired, or the tape removed at the very least. I would rather not tinker with it myself, since i am very clumsy with tiny screws, and would probably destroy the thing worse than it is.
Thanks,
Jeremy
-
The camera doesnt power on?did you try holding the reset button for 10seconds?
-
i'll try that, i believe the thing was fried cause it smelled smoky
...
looked and it had no reset button
-
Sounds like its dead,but there should be a reset button it is very small and you will need a paperclip to push it.
-
found it, didn't work :(
-
found it, didn't work :(
Saying cuss words and Sony in the same sentence doesn't usually solve the problem, but it does help you mentally.
-
agreed
found it, didn't work :(
Saying cuss words and Sony in the same sentence doesn't usually solve the problem, but it does help you mentally.
Did find a place that will hopefully be able to remove the tape and repair the camera though