Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: waltmon on October 03, 2021, 12:54:00 PM
-
Anyone found an adapter for the top of your mic stand to increase the length of the 3/8" stud? I want to screw on a stereo bar and have enough thread left to screw on a threaded active mount center of the stereo bar. Thanks all.
-
This might be what you are looking for Walt.
https://www.bhphotovideo.com/c/product/1340622-REG/kupo_kg014712_1_conversion_adapter_3_8_16f.html/overview (https://www.bhphotovideo.com/c/product/1340622-REG/kupo_kg014712_1_conversion_adapter_3_8_16f.html/overview)
-
A 3/8" threaded stud of sufficient length as posted above + a 3/8" threaded coupler. Use thread-locking compound between stud and coupler or a torqued down lock nut to form a semi-permanent single part with a female 3/8" on one side and a male 3/8" of the length you need on the other.
Theaded coupler example-
https://www.boltdepot.com/Product-Details.aspx?product=23836&qty=1&gclid=CjwKCAjwzOqKBhAWEiwArQGwaEks1JKoD_C4y9w_SLA9Ii_B7u6wm7wiN2W10SHyNFNOUd6dxRidURoCzTIQAvD_BwE (https://www.boltdepot.com/Product-Details.aspx?product=23836&qty=1&gclid=CjwKCAjwzOqKBhAWEiwArQGwaEks1JKoD_C4y9w_SLA9Ii_B7u6wm7wiN2W10SHyNFNOUd6dxRidURoCzTIQAvD_BwE)
-
Thanks for the info!