its seems almost all sbd > aud matrix that have been attemped ....has some serious echo from the sbd...whats the best way to remedy the ecoey sbd
I have done a bunch of on the fly matrices with my P-Mod UA-5. Delay issues really only come in to play when the mics are ~20-25' or more from the sound source (PA stacks, etc.) In one club here in San Diego, I clamp my mics to a railing above the SBD which is just about 20' back from the PA. I like to use the -75hz bass roll off setting on the mics at the back end of the delay-range so the low end does not sound muddy. If you are any futher, it is better to mix the sources later. I've never had a delay issue with stage micing + a SBD feed; however, it may be possible if the stage is very large and the mics are far enough from the amps/drums, etc.