Become a Site Supporter and Never see Ads again!

Author Topic: "On the fly" Matrix?  (Read 6985 times)

0 Members and 1 Guest are viewing this topic.

Offline 2manyrocks

  • Trade Count: (12)
  • Taperssection All-Star
  • ****
  • Posts: 1664
Re: "On the fly" Matrix?
« Reply #15 on: July 08, 2015, 02:59:24 PM »
60d has selectable delay built in the menu.  It also doesn't lock you out of changing your camera gain out once you start recording. Send a decent feed into the camera and be done.   

Offline capnhook

  • All your llamas are belong to us....
  • Site Supporter
  • Trade Count: (20)
  • Needs to get out more...
  • *
  • Posts: 4843
  • All your llamas are belong to us....
Re: "On the fly" Matrix?
« Reply #16 on: July 08, 2015, 04:27:32 PM »
I used a Berhinger mixer in my early days and mixed onstage mics with a board feed and outputted to a D8. They are still some of my favorite tapes to listen back to.

Yeah, that's right Jhurlbs81.....if mics are onstage, no real need for delay.... 8)
Proud member of the reality-based community

BSCS-L->JB-mod [NAK CM-300 (CP-3) and/or (CP-1)]->LSD2->CA CAFS-Omni->Sony ECM-907**Apogee MiniMe Rev. C->CA Ugly II->**Edirol OCM R-44->Tascam DR-22WL->Sony TCD-D8


"Don't ever take an all or nothing attitude when it comes to making a difference
and being beautiful and making the world a beautiful place through your actions.
Every little bit is registered.  Every little bit.  So be as beautiful as you can as often as you can"

"It'll never be over, 'till we learn."
 
"My dream is to get a bus and get the band and just go coast to coast. Just about everything else except music, is anti-musical.  That's it.  Music's the thing." - Jeb Puryear

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 15700
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: "On the fly" Matrix?
« Reply #17 on: July 08, 2015, 04:55:47 PM »
That's true.  Only need delay if you have mics farther back in the room. 

Problem then may be that even with good isolating cans or in-ears it becomes very hard to hear the mix clearly enough to make appropriate decisions while tweaking it if the recorder is located up front too. 
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1626
    • How I Escaped My Uncertain Fate
Re: "On the fly" Matrix?
« Reply #18 on: July 08, 2015, 06:14:28 PM »
I think you guys are missing a key point. The thread specifically addresses the issues of making an "on the fly" matrix, not the obvious advantages of doing it later.

Yes, I did indeed miss that that's what you were talking about, sorry. Topic had drifted, and I had with it.

If on-the-fly matrix is the goal, yes, 4 tracks good.

Offline Brian E.

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 4095
  • Gender: Male
  • is chicago.... is not chicago....
Re: "On the fly" Matrix?
« Reply #19 on: July 08, 2015, 08:14:14 PM »
thanks all, appreciate all the input in every way.  I did eventually just align in Audacity.  I couldn't get a different output level on the board - I was lucky I got what I got.  Luckily the camera has a built in limiter.  It turned out pretty well - once I get permission, I'll post!
my tapes:  The Archive | Dime | Etree

Recorder - Sony PCM A-10 | Cans - Shure SE535 | Mics - CA-14 Cards | Canon EOS 5D Mark II 17-40L f4 50 f1.4 70-200L f2.8 IS II 430EX II

Offline deadheadcorey

  • HOME TEAM Tapir
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 4223
  • Gender: Male
  • think for yourself, question authority
    • My Recordings on the LMA
Re: "On the fly" Matrix?
« Reply #20 on: July 08, 2015, 08:17:42 PM »
if you are doing an on the fly matrix, YOU MUST run your mics on stage bottom line
mics: Audix M1245a-HC; AKG SE300B/CK91; Naiant X-O (hanging in the sweet spot @ Quixote's True Blue)
pres: Oade T+ UA-5; digimod UA-5
recs: R-09x3

iso: 2 ck93 caps
iso: pair of AT4041 mics

Official Archivist for Grant Farm

http://www.facebook.com/kindrecordingscolorado

Jerry Joseph rap during 'Conscious Contact'
"Life's pretty good. life's pretty good. it isn't all good.
I hate it when people tell me its all good. it's not all good.
it's not suppose to be all good. it's suppose to be bad sometimes so you can enjoy the good parts."

Offline Brian E.

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 4095
  • Gender: Male
  • is chicago.... is not chicago....
Re: "On the fly" Matrix?
« Reply #21 on: July 08, 2015, 09:17:10 PM »
^ makes sense!
my tapes:  The Archive | Dime | Etree

Recorder - Sony PCM A-10 | Cans - Shure SE535 | Mics - CA-14 Cards | Canon EOS 5D Mark II 17-40L f4 50 f1.4 70-200L f2.8 IS II 430EX II

Offline Jhurlbs81

  • Trade Count: (20)
  • Needs to get out more...
  • *****
  • Posts: 3076
  • Gender: Male
    • My LMA collection
Re: "On the fly" Matrix?
« Reply #22 on: July 09, 2015, 06:38:09 AM »
if you are doing an on the fly matrix, YOU MUST run your mics on stage bottom line

Or your name better be Kevin Browning.
FREE JERRYFREAK!

 

RSS | Mobile
Page created in 0.077 seconds with 33 queries.
© 2002-2024 Taperssection.com
Powered by SMF