Become a Site Supporter and Never see Ads again!

Author Topic: iZotope Rx 7  (Read 31702 times)

0 Members and 1 Guest are viewing this topic.

Offline jerryfreak

  • No PZ
  • (31)
  • Needs to get out more...
  • *
  • Posts: 6206
  • The plural of anecdote is not data
Re: iZotope Rx 7
« Reply #165 on: December 13, 2020, 09:50:10 PM »
i just used the 'phase' tool for the first time ever to repair an asymmetrical waveform on a webrip

is there anything this software can't do?

Nope; it's basically audio repair witchcraft.

I used the DeCrackle module a couple weeks ago to repair a bunch of buffer underrun errors on a direct-to-PC recording when I had set the sample buffer too low. Saved me a tense moment with my better half, because all of her vocal takes had this problem (which was my fault) and I didn't have to ask her to spend another hour or so redoing those takes.

i could see where dropped samples could repaired with vox, which is less pitch/tempo variable than some other music sources (or more complex music sources with multiple vox, instruments and percussion). lil drops are prob invisible once the 'cliffs' in waveform are removed 
currently "banned" for this "controversial" post
email me if you need to connect, as i am not allowed to send PM

-------------------------------------------------------------------------------------------------------
for sale (email in profile):
Mixpre6 v1 (NIB)
CA14 cards
(2) Manfrotto 099B mic poles

---------------
(1) Phish LA Forum tapers ticket

Offline voltronic

  • (34)
  • Needs to get out more...
  • *****
  • Posts: 3409
Re: iZotope Rx 7
« Reply #166 on: December 14, 2020, 06:35:51 AM »
i just used the 'phase' tool for the first time ever to repair an asymmetrical waveform on a webrip

is there anything this software can't do?

Nope; it's basically audio repair witchcraft.

I used the DeCrackle module a couple weeks ago to repair a bunch of buffer underrun errors on a direct-to-PC recording when I had set the sample buffer too low. Saved me a tense moment with my better half, because all of her vocal takes had this problem (which was my fault) and I didn't have to ask her to spend another hour or so redoing those takes.

i could see where dropped samples could repaired with vox, which is less pitch/tempo variable than some other music sources (or more complex music sources with multiple vox, instruments and percussion). lil drops are prob invisible once the 'cliffs' in waveform are removed
I don't know that they were exactly dropped samples, but short bursts of full-spectrum distortion.  Either way, DeCrackle smoothed almost every one over until they were inaudible.
DPA 4061 ~ Line Audio CM3 ~ Naiant X-Q ~ AT 853  |  Naiant PFAs ~ Shure FP24  |  Zoom F6 ~ Sony PCM-M10
MOTU M2 ~ KRK Rokit RP5 ~ Sennheiser HD 650 ~ Etymotic ER4XR

Team Line Audio

Offline DavidPuddy

  • (12)
  • Taperssection All-Star
  • ****
  • Posts: 1129
Re: iZotope Rx 7
« Reply #167 on: July 13, 2021, 12:28:37 PM »
I'm getting an upgrade offer to get RX 8 Standard for $99. I assume everyone that has RX7 Standard is eligible.

Offline colargol

  • (10)
  • Taperssection Regular
  • **
  • Posts: 170
Re: iZotope Rx 7
« Reply #168 on: August 16, 2021, 09:25:22 AM »
I've been using rx-7/rx-8 for a while now, and it is very inspiring to be able to enhance my old recordings  :)

For a few basic operations, I've been using an old editing software still, because I haven't found a way to do it in rx-8:

* appending one file to another (without copy/paste)
* fading levels that are a bit more advanced than fade in/out. Let's say I select a portion of the file, and want that to be faded from 80% to 100%.
* Quickly navigate by using keyboard shortcuts for zooming

Does anyone know how to do these things in rx-8? Are there plugins available that would help me? I would love to stop using the old software...
If not, what programs are you guys using for these sorts of operations? I am a mac user...

-colargol
« Last Edit: August 16, 2021, 09:30:38 AM by colargol »
MK4s/MK41s > nbox/nbob actives > tinybox/babynbox > M10/A10

Offline checht

  • (5)
  • Taperssection Member
  • ***
  • Posts: 419
  • Gender: Male
  • Old and in the Way
Re: iZotope Rx 7
« Reply #169 on: August 16, 2021, 10:59:33 AM »
I use Audacity and find it great for my purposes. Many here use Reaper, too.
Schoeps MK41s > nbob KCY >
Naiant PFA 60v > Sound Devices MP-6 II  or  Naiant IPA > Roland R-07
Recordings at LMA: https://archive.org/search.php?query=subject%3A%22Chris+Hecht%22&sort=-date

Offline if_then_else

  • (0)
  • Taperssection Member
  • ***
  • Posts: 374
Re: iZotope Rx 7
« Reply #170 on: August 16, 2021, 01:19:46 PM »
Samplitude user here (even though I've also got a Reaper license).

Appending one file to another should be possible with almost any DAW. You could even merge them using foobar2000 or ffmpeg.
The second criterium sounds more like you want cross-fading with various shapes. (Worked great with a 30+ multi-track matrix recording in Samplitude. I had cross-faded and muted the individual instruments when they weren't playing. The overall noise floor of the resulting recording was much lower than the one of the instant mix.)

Offline voltronic

  • (34)
  • Needs to get out more...
  • *****
  • Posts: 3409
Re: iZotope Rx 7
« Reply #171 on: August 17, 2021, 05:15:31 PM »
I've been using rx-7/rx-8 for a while now, and it is very inspiring to be able to enhance my old recordings  :)

For a few basic operations, I've been using an old editing software still, because I haven't found a way to do it in rx-8:

* appending one file to another (without copy/paste)
* fading levels that are a bit more advanced than fade in/out. Let's say I select a portion of the file, and want that to be faded from 80% to 100%.
* Quickly navigate by using keyboard shortcuts for zooming

Does anyone know how to do these things in rx-8? Are there plugins available that would help me? I would love to stop using the old software...
If not, what programs are you guys using for these sorts of operations? I am a mac user...

-colargol

Longtime Reaper user here. These pages have what you want:
https://urosbaric.com/reaper-classical-music-editing
DPA 4061 ~ Line Audio CM3 ~ Naiant X-Q ~ AT 853  |  Naiant PFAs ~ Shure FP24  |  Zoom F6 ~ Sony PCM-M10
MOTU M2 ~ KRK Rokit RP5 ~ Sennheiser HD 650 ~ Etymotic ER4XR

Team Line Audio

Offline phil_er_up

  • (9)
  • Taperssection All-Star
  • ****
  • Posts: 1145
Re: iZotope Rx 7
« Reply #172 on: August 18, 2021, 07:05:13 AM »
Everyday is a gift. Enjoy each one!
Forward motion bring positive results.

Offline capnhook

  • All your llamas are belong to us....
  • Site Supporter
  • (20)
  • Needs to get out more...
  • *
  • Posts: 4316
  • All your llamas are belong to us....
Re: iZotope Rx 7
« Reply #173 on: August 18, 2021, 08:37:26 AM »
iZotope Ozone 9 Elements Mastering Software Suite - $19.00
https://www.sweetwater.com/store/detail/Ozone9El--izotope-ozone-9-elements-mastering-suite

 :hmmm:

Not affiliated with this, and don't even know if might work.....but if you get Elements for $19, you might be able to upgrade to Advanced for CHEAP.

Not too long ago I I went through this, took the upgrade offer and paid only $149, a $350 savings on the $499 retail price for Advanced.

Ozone 9 Advanced Crossgrade from any paid iZotope product

https://plugindiscounts.com/product/izotope-ozone-9-advanced-crossgrade/

Proud member of the reality-based community

BSCS-L->JB-mod [NAK CM-300 (CP-3) and/or (CP-1)]->LSD2->CA CAFS-Omni->Sony ECM-907**Apogee MiniMe Rev. C->CA Ugly II->**Edirol OCM R-44->Tascam DR-22WL->Sony TCD-D8


"Don't ever take an all or nothing attitude when it comes to making a difference
and being beautiful and making the world a beautiful place through your actions.
Every little bit is registered.  Every little bit.  So be as beautiful as you can as often as you can"

"It'll never be over, 'till we learn."
 
"My dream is to get a bus and get the band and just go coast to coast. Just about everything else except music, is anti-musical.  That's it.  Music's the thing." - Jeb Puryear

Offline DavidPuddy

  • (12)
  • Taperssection All-Star
  • ****
  • Posts: 1129
Re: iZotope Rx 7
« Reply #174 on: August 18, 2021, 09:43:13 AM »
iZotope Ozone 9 Elements Mastering Software Suite - $19.00
https://www.sweetwater.com/store/detail/Ozone9El--izotope-ozone-9-elements-mastering-suite

 :hmmm:

Not affiliated with this, and don't even know if might work.....but if you get Elements for $19, you might be able to upgrade to Advanced for CHEAP.

Not too long ago I I went through this, took the upgrade offer and paid only $149, a $350 savings on the $499 retail price for Advanced.

Ozone 9 Advanced Crossgrade from any paid iZotope product

https://plugindiscounts.com/product/izotope-ozone-9-advanced-crossgrade/

Yep, I bought RX7 Elements and cross-graded to Standard for $99 last year

Offline fobstl

  • (4)
  • Taperssection All-Star
  • ****
  • Posts: 1590
Re: iZotope Rx 7
« Reply #175 on: August 18, 2021, 01:31:31 PM »
iZotope Ozone 9 Elements Mastering Software Suite - $19.00
https://www.sweetwater.com/store/detail/Ozone9El--izotope-ozone-9-elements-mastering-suite

 :hmmm:

Not affiliated with this, and don't even know if might work.....but if you get Elements for $19, you might be able to upgrade to Advanced for CHEAP.

Not too long ago I I went through this, took the upgrade offer and paid only $149, a $350 savings on the $499 retail price for Advanced.

Ozone 9 Advanced Crossgrade from any paid iZotope product

https://plugindiscounts.com/product/izotope-ozone-9-advanced-crossgrade/

Yep, I bought RX7 Elements and cross-graded to Standard for $99 last year
There is also this RX8 Elements on sale for $19. I was wondering about buying this and upgrading cheaper. From the above it sounds like this might be possible.
https://www.sweetwater.com/store/detail/RX8El--izotope-rx-8-elements-audio-repair-plug-in

Offline nassau73

  • (3)
  • Taperssection Regular
  • **
  • Posts: 111
Re: iZotope Rx 7
« Reply #176 on: August 18, 2021, 01:57:57 PM »
I've been using rx-7/rx-8 for a while now, and it is very inspiring to be able to enhance my old recordings  :)

For a few basic operations, I've been using an old editing software still, because I haven't found a way to do it in rx-8:

* appending one file to another (without copy/paste)
* fading levels that are a bit more advanced than fade in/out. Let's say I select a portion of the file, and want that to be faded from 80% to 100%.
* Quickly navigate by using keyboard shortcuts for zooming

Does anyone know how to do these things in rx-8? Are there plugins available that would help me? I would love to stop using the old software...
If not, what programs are you guys using for these sorts of operations? I am a mac user...

-colargol

1) I have not found an easy way to append one file to another. I wrote to Izotope about a year ago and told them it would be helpful to add a feature similar to Adobe Audition's "File > Append" function. Received a nice reply saying they would discuss it but so far I have not seen it in RX.

2) You might try using the "clip gain" functionality in RX. (Audacity has this functionality as well). With Clip Gain, you're able to add various "points" along the section you want to control and lower or raise the gain in steps. For example, I've used this in files that have alot of quiet banter in between songs. The artist might speak loudly and softly and it can be time consuming to balance everything out but for me it's worth the effort.

3) I'm not sure about how Izotope works for you on a mac. In windows (using RX7 standard) we can use the middle mouse wheel to zoom in and out on the file section being displayed. Another thing that can be done is to highlight a small section of the file that is showing on your screen. Hitting the UP arrow key zooms in on that highlighted section and centers it on your screen. You can do this multiple times to keep zooming or vice versa to zoom out.

Offline checht

  • (5)
  • Taperssection Member
  • ***
  • Posts: 419
  • Gender: Male
  • Old and in the Way
Re: iZotope Rx 7
« Reply #177 on: August 18, 2021, 03:37:41 PM »
Didn't realize OP was on MacOS.

Xact is a front end to shntool, and one can use the 'join' function in shntool to append files.
Schoeps MK41s > nbob KCY >
Naiant PFA 60v > Sound Devices MP-6 II  or  Naiant IPA > Roland R-07
Recordings at LMA: https://archive.org/search.php?query=subject%3A%22Chris+Hecht%22&sort=-date

Offline morst

  • Trade Unionist
  • (2)
  • Needs to get out more...
  • *****
  • Posts: 4736
Re: iZotope Rx 7
« Reply #178 on: August 20, 2021, 12:15:08 PM »
Xact is a front end to shntool, and one can use the 'join' function in shntool to append files.
I use this to merge files and I've double checked and it's lossless.

 

RSS | Mobile
Page created in 0.055 seconds with 37 queries.
© 2002-2021 Taperssection.com
Powered by SMF