Become a Site Supporter and Never see Ads again!

Author Topic: TechFlex UPDATE  (Read 5478 times)

0 Members and 1 Guest are viewing this topic.

ThePiedPiper

  • Guest
  • Trade Count: (0)
TechFlex UPDATE
« on: August 10, 2019, 02:16:51 AM »
Is 1/8" TechFlex the proper/correct size for the cabling for mics like Church Audio & Sound Professionals?  If so, without having to buy a whole roll of it, is there somewhere I can purchase shorter lengths like 15-20' ?

The most important question is the 1st one as I can always do some googling to find some for sale  :yahoo:


« Last Edit: August 21, 2019, 04:58:55 PM by ThePiedPiper »

Offline goodcooker

  • Trade Count: (43)
  • Needs to get out more...
  • *****
  • Posts: 4638
  • Gender: Male
  • goes to 11
Re: TECHFLEX
« Reply #1 on: August 10, 2019, 05:11:30 PM »
Is 1/8" TechFlex the proper/correct size for the cabling for mics like Church Audio & Sound Professionals?  If so, without having to buy a whole roll of it, is there somewhere I can purchase shorter lengths like 15-20' ?

The most important question is the 1st one as I can always do some googling to find some for sale  :yahoo:

I haven't seen techflex any smaller than 1/8th so it would have to do even if it's a little baggy on the small diameter cable. You can probably get 1/16th from somewhere if your cable is very small diameter.

You can buy 25 footers of 1/8 inch from Parts Express - https://www.parts-express.com/techflex-1-8-expandable-sleeving-25-ft-black--082-300?utm_source=google&utm_medium=cpc&utm_campaign=pla&gclid=EAIaIQobChMIjJLb-pr54wIViYTICh3e4QsFEAQYASABEgIOTPD_BwE
Line Audio CM3/OM1 || MBHO KA500 hyper>PFA|| ADK A51 type IV || AKG C522XY
Oade Warm Mod and Presence+ Mod UA5s || Aerco MP2(needs help) || Neve Portico 5012 || Apogee MMP
SD Mixpre6 || Oade Concert Mod DR100mkii

pocket sized - CA11 cards > SP SB10 > Sony PCM A10

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline old and in the way

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 194
Re: TECHFLEX
« Reply #2 on: August 10, 2019, 08:31:51 PM »

ThePiedPiper

  • Guest
  • Trade Count: (0)
Re: TECHFLEX
« Reply #3 on: August 10, 2019, 09:46:37 PM »
Thank You Goodcooker and old and in the way !!!

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 15698
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: TECHFLEX
« Reply #4 on: August 14, 2019, 11:55:59 AM »
I've been meaning to pickup some 1/8" diameter techflex for re-rigging a few setups and re-jacketing some permanently attached DPA 4060 mic cables on which the jacket is cracked and falling off in chunks.

I think I'll use the Flexo-noise-reduction type. Reduced fabric noise will be beneficial, but I'm also thinking that its softer "hand" will make for improved comfort in body-worn applications where it is in contact against skin. 

NR is used in body wiring harnesses, instrument panel and lighting wiring, cable & hose assemblies, and other limited access applications where noise reduction is desirable...
The special hybrid construction suppresses noise from loose harnesses moving against body or dash panels. It has a soft and flexible feel, reminiscent of old style cotton loom.


Link to NR on techflex website- https://www.techflex.com/specialty/flexo-noise-reduction
Link to NR at the supplier old and in the way posted- https://www.wirecare.com/manufacturers/techflex/flexo-noise-reduction

FYI, F6 Quiet is the split-tubing configuration which uses the same material.



Also of potential interest, while checking out Wirecare.com I came across a texflex variant which offers EMI shielding- Flexo Shield

HIGH PERFORMANCE ELECTROMAGNETIC INTERFERENCE SHIELD
It is an expandable, high performance sleeving that provides a high level of EMI (ElectroMagnetic Interference) shielding. Flexo Shield is cut and abrasion resistant, very flexible, strong and lightweight. With its high temperature aramid fiber core and special construction, Flexo Shield expands to fit over plugs and connectors and contracts back down for a perfect fit. Flexo Shield is great for applications where light weight and high performance are needed.


https://www.wirecare.com/manufacturers/techflex/flexo-shield
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

ThePiedPiper

  • Guest
  • Trade Count: (0)
Re: TECHFLEX
« Reply #5 on: August 14, 2019, 01:34:44 PM »
I've been meaning to pickup some 1/8" diameter techflex for re-rigging a few setups and re-jacketing some permanently attached DPA 4060 mic cables on which the jacket is cracked and falling off in chunks.

I think I'll use the Flexo-noise-reduction type. Reduced fabric noise will be beneficial, but I'm also thinking that its softer "hand" will make for improved comfort in body-worn applications where it is in contact against skin. 

NR is used in body wiring harnesses, instrument panel and lighting wiring, cable & hose assemblies, and other limited access applications where noise reduction is desirable...
The special hybrid construction suppresses noise from loose harnesses moving against body or dash panels. It has a soft and flexible feel, reminiscent of old style cotton loom.


Link to NR on techflex website- https://www.techflex.com/specialty/flexo-noise-reduction
Link to NR at the supplier old and in the way posted- https://www.wirecare.com/manufacturers/techflex/flexo-noise-reduction

FYI, F6 Quiet is the split-tubing configuration which uses the same material.



Also of potential interest, while checking out Wirecare.com I came across a texflex variant which offers EMI shielding- Flexo Shield

HIGH PERFORMANCE ELECTROMAGNETIC INTERFERENCE SHIELD
It is an expandable, high performance sleeving that provides a high level of EMI (ElectroMagnetic Interference) shielding. Flexo Shield is cut and abrasion resistant, very flexible, strong and lightweight. With its high temperature aramid fiber core and special construction, Flexo Shield expands to fit over plugs and connectors and contracts back down for a perfect fit. Flexo Shield is great for applications where light weight and high performance are needed.


https://www.wirecare.com/manufacturers/techflex/flexo-shield

Gutbucket,
I'm very interested in the reduced fabric noise like you mentioned ... which design is it exactly (can you post a link)? Thanks again for all your help!!

Is it this one?

https://www.techflex.com/specialty/flexo-noise-reduction


« Last Edit: August 14, 2019, 01:36:54 PM by ThePiedPiper »

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 15698
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: TECHFLEX
« Reply #6 on: August 14, 2019, 01:55:54 PM »
^ Yep.  That's the same link as the first one in my post.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

ThePiedPiper

  • Guest
  • Trade Count: (0)
Re: TECHFLEX
« Reply #7 on: August 14, 2019, 02:10:43 PM »
 :coolguy:
Thank You again!

ThePiedPiper

  • Guest
  • Trade Count: (0)
Re: TECHFLEX
« Reply #8 on: August 21, 2019, 04:58:29 PM »
UPDATE:

I ordered this:

https://www.amazon.com/gp/product/B074LNGB3G

I picked up the 1/8" Black/Blue and it was nicely package and very easy to work with.
Thanks for all the great advice on this.


 

RSS | Mobile
Page created in 0.09 seconds with 34 queries.
© 2002-2024 Taperssection.com
Powered by SMF