Become a Site Supporter and Never see Ads again!

Author Topic: Mounting Schoeps MK41V  (Read 1293 times)

0 Members and 1 Guest are viewing this topic.

Offline BradleyJY15

  • Site Supporter
  • (0)
  • Taperssection Regular
  • *
  • Posts: 112
  • Gender: Male
Mounting Schoeps MK41V
« on: May 17, 2021, 11:59:38 AM »
I am looking for some help on mounting a pair of Schoeps MK41V caps.

I currently have a setup with MK22 caps: Rycote INV-6 (3/8" thread mounted on top of stand) -> Shapeways NOS/Active Cables mount.

I'd like to add a mic bar for the 41V caps to use in PAS with adjustable width/angles.  Any recs on mic bars and shock mounts for the 41Vs?

Any advice or recommendations?  Thank you!
Schoeps MK22 & MK41 -> Nbob Actives -> Naiant PFA -> SD MixPre-6ii

Offline DavidPuddy

  • (12)
  • Taperssection All-Star
  • ****
  • Posts: 1150
Re: Mounting Schoeps MK41V
« Reply #1 on: September 06, 2021, 05:17:40 AM »
I am looking for some help on mounting a pair of Schoeps MK41V caps.

I currently have a setup with MK22 caps: Rycote INV-6 (3/8" thread mounted on top of stand) -> Shapeways NOS/Active Cables mount.

I'd like to add a mic bar for the 41V caps to use in PAS with adjustable width/angles.  Any recs on mic bars and shock mounts for the 41Vs?

Any advice or recommendations?  Thank you!

Old thread, but I would contact Scott (SRS). He will custom make a mount for pretty much any setup you can think of.

Offline dactylus

  • Site Supporter
  • (56)
  • Needs to get out more...
  • *
  • Posts: 5645
  • Gender: Male
  • Maplewood, MN
Re: Mounting Schoeps MK41V
« Reply #2 on: September 06, 2021, 10:57:04 AM »
Be sure and let Scott know that you're using nBobs if you are.  They are NOT the same size as the official Schoeps!!

As already mentioned, Scott will custom make any options that you request.  I think that the mount below is for the official Schoeps cabling.  Scott usually has "nBobs" listed in the description for the mount if they are for nBobs!!

https://www.shapeways.com/product/YE635ELWF/din-schoeps-actives-vertical-capsules?optionId=61777746&li=shops
hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

Offline andyjah

  • (14)
  • Needs to get out more...
  • *****
  • Posts: 2010
Re: Mounting Schoeps MK41V
« Reply #3 on: September 12, 2021, 01:39:42 AM »
Noah Bickart has a few bars for the nbobs designed for the mk22/vert caps through Scott. Very convenient.

Offline dactylus

  • Site Supporter
  • (56)
  • Needs to get out more...
  • *
  • Posts: 5645
  • Gender: Male
  • Maplewood, MN
Re: Mounting Schoeps MK41V
« Reply #4 on: September 12, 2021, 12:11:07 PM »
Noah Bickart has a few bars for the nbobs designed for the mk22/vert caps through Scott. Very convenient.

^
Yes, I saw those and will probably be picking up one of those bars for my mk22/vert caps!

hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

Offline BradleyJY15

  • Site Supporter
  • (0)
  • Taperssection Regular
  • *
  • Posts: 112
  • Gender: Male
Re: Mounting Schoeps MK41V
« Reply #5 on: September 13, 2021, 07:53:34 PM »
Thank you for the responses.  I ended up going with the MK41 caps.  And I am using SRS mounts for actives/Nbobs, and I used a C clamp to do 4 mics on my stand.
« Last Edit: September 14, 2021, 12:59:03 AM by BradleyJY15 »
Schoeps MK22 & MK41 -> Nbob Actives -> Naiant PFA -> SD MixPre-6ii

Offline BradleyJY15

  • Site Supporter
  • (0)
  • Taperssection Regular
  • *
  • Posts: 112
  • Gender: Male
Re: Mounting Schoeps MK41V
« Reply #6 on: September 14, 2021, 12:58:32 AM »
I should also say that I am blown away at my new MK41 caps. I had taped pre-COVID indoors with my MK22 caps and they were awesome but now outdoors and larger venues I really appreciate the 41 caps.
Schoeps MK22 & MK41 -> Nbob Actives -> Naiant PFA -> SD MixPre-6ii

Offline daspyknows

  • Complaint Dept.
  • (1)
  • Needs to get out more...
  • *****
  • Posts: 8058
  • Gender: Male
  • Don't ask, don't tell, don't get get caught
Re: Mounting Schoeps MK41V
« Reply #7 on: September 14, 2021, 11:22:43 AM »
MK41s great for the larger venues.  I use mine in arenas, stadiums and festivals mostly.
For the village idiot, nothing to see here.

Offline jdwtyl

  • (9)
  • Taperssection Member
  • ***
  • Posts: 267
Re: Mounting Schoeps MK41V
« Reply #8 on: September 14, 2021, 03:15:17 PM »
Thank you for the responses.  I ended up going with the MK41 caps.  And I am using SRS mounts for actives/Nbobs, and I used a C clamp to do 4 mics on my stand.

I also run 41s and 22s into a MixPre-6. I had Scott build me a mount that can run all 4 channels at once. He made me a DINa / DIN bar and a NOS / PAS bar, it gives a lot flexibility and is very easy to use.
Schoeps MK22, MK41 - Matched Pairs
Schoeps CMC6 x4, Schoeps CMR - Pair
Naiant Tinybox, Edirol UA-5 (bm2p+), Naiant PFA
SD MixPre-6ii, Edirol R-44 (OCM), Edirol R-09HR, Tascam DR-2D

Offline dactylus

  • Site Supporter
  • (56)
  • Needs to get out more...
  • *
  • Posts: 5645
  • Gender: Male
  • Maplewood, MN
Re: Mounting Schoeps MK41V
« Reply #9 on: September 15, 2021, 07:11:53 AM »
Thank you for the responses.  I ended up going with the MK41 caps.  And I am using SRS mounts for actives/Nbobs, and I used a C clamp to do 4 mics on my stand.

I also run 41s and 22s into a MixPre-6. I had Scott build me a mount that can run all 4 channels at once. He made me a DINa / DIN bar and a NOS / PAS bar, it gives a lot flexibility and is very easy to use.

^
jdwtyl,

Do you have a link for the DINa / DIN bar and the NOS / PAS bar?

thanks,

David


hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

Offline BradleyJY15

  • Site Supporter
  • (0)
  • Taperssection Regular
  • *
  • Posts: 112
  • Gender: Male
Re: Mounting Schoeps MK41V
« Reply #10 on: September 15, 2021, 11:25:58 AM »
Thank you for the responses.  I ended up going with the MK41 caps.  And I am using SRS mounts for actives/Nbobs, and I used a C clamp to do 4 mics on my stand.

I also run 41s and 22s into a MixPre-6. I had Scott build me a mount that can run all 4 channels at once. He made me a DINa / DIN bar and a NOS / PAS bar, it gives a lot flexibility and is very easy to use.

Could you show a picture of that bar?  I run my MK22 in NOS and 41 DINa. Curious what that bar looks like.
Schoeps MK22 & MK41 -> Nbob Actives -> Naiant PFA -> SD MixPre-6ii

Offline jdwtyl

  • (9)
  • Taperssection Member
  • ***
  • Posts: 267
Re: Mounting Schoeps MK41V
« Reply #11 on: September 16, 2021, 06:05:45 PM »
Thank you for the responses.  I ended up going with the MK41 caps.  And I am using SRS mounts for actives/Nbobs, and I used a C clamp to do 4 mics on my stand.

I also run 41s and 22s into a MixPre-6. I had Scott build me a mount that can run all 4 channels at once. He made me a DINa / DIN bar and a NOS / PAS bar, it gives a lot flexibility and is very easy to use.
I don’t see it on the website. I could show you a picture if you’d like, just let me know!

^
jdwtyl,

Do you have a link for the DINa / DIN bar and the NOS / PAS bar?

thanks,

David
Schoeps MK22, MK41 - Matched Pairs
Schoeps CMC6 x4, Schoeps CMR - Pair
Naiant Tinybox, Edirol UA-5 (bm2p+), Naiant PFA
SD MixPre-6ii, Edirol R-44 (OCM), Edirol R-09HR, Tascam DR-2D

Offline dactylus

  • Site Supporter
  • (56)
  • Needs to get out more...
  • *
  • Posts: 5645
  • Gender: Male
  • Maplewood, MN
Re: Mounting Schoeps MK41V
« Reply #12 on: September 17, 2021, 10:31:34 AM »
Thank you for the responses.  I ended up going with the MK41 caps.  And I am using SRS mounts for actives/Nbobs, and I used a C clamp to do 4 mics on my stand.

I also run 41s and 22s into a MixPre-6. I had Scott build me a mount that can run all 4 channels at once. He made me a DINa / DIN bar and a NOS / PAS bar, it gives a lot flexibility and is very easy to use.
I don’t see it on the website. I could show you a picture if you’d like, just let me know!

^
jdwtyl,

Do you have a link for the DINa / DIN bar and the NOS / PAS bar?

thanks,

David

Thanks.  I was hoping that it was on the website and that I just overlooked it.  I'd like to see what the bars look like if you could post a photo.  Thank you
hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

 

RSS | Mobile
Page created in 0.083 seconds with 36 queries.
© 2002-2021 Taperssection.com
Powered by SMF