Become a Site Supporter and Never see Ads again!

Author Topic: Best budget setup for newbie?  (Read 2513 times)

0 Members and 1 Guest are viewing this topic.

Offline Luke_of_Mass

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 2
Best budget setup for newbie?
« on: July 08, 2021, 08:54:11 PM »
Greetings all,

Relatively new to taping - I've got a Zoom H2 unit, which has pretty good internal mics and I've used many times in settings where I was either welcome to tape or specifically there to do taping for somebody - never done stealth apart from just picking a table near the stage at sitdown venues and putting the unit in the middle of the table, capturing the ambient sound in 4ch mode. This worked OK except for the instances where my date reached for the chutneys  :angry3:

As the world turns rightside up I'd like to put this recorder to more use and wanted to see what your collective opinions may be as to the best budget mics, bettery boxes, etc... A friend suggested Church audio gear but it almost all appears out of stock all the time and another friend warned me that they were somewhat delicate.

So what say you?

Thanks in advance, and I'm looking forward to learning so much from this forum :)

Luke

Offline DavidPuddy

  • Trade Count: (18)
  • Taperssection All-Star
  • ****
  • Posts: 1799
  • If it's too loud, turn it down.
Re: Best budget setup for newbie?
« Reply #1 on: July 08, 2021, 10:32:24 PM »
Let us know what your budget is and if you plan on taping openly or not. Setups vary quite a bit here and there are many ways to go.

A forum sponsor, Core Sound (no affiliation), has a low-cost cardioid mic set with battery box for around $100 and it would work with the recorder you already have. https://www.core-sound.com/shop/low-cost-binaural-cardioid

I would order from them over Church Audio any day.
Mics: mk4v/mk41v/mk22 > CMC1L/Nbobs, 4061, MKE2
Preamps: Mixpre-D, Nbox Platinum ABS
Recorders: Mixpre-6 ii, PCM-A10

Offline morst

  • I think I found an error on the internet; #UnionStrong
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5950
Re: Best budget setup for newbie?
« Reply #2 on: July 09, 2021, 12:27:01 AM »
Relatively new to taping - I've got a Zoom H2 unit, which has pretty good internal mics
I agree that the internal mics on the original H2 "Electric Shaver" are pretty good. I've made decent use of them by themselves, as well as manually mixed with board feeds.
Example of a mix:
https://archive.org/details/Quasi2008-09-12.matrix/Quasi2008-09-12-MTX-t09.flac

HOWEVER a word of caution about the original H2 Handy Recorder: do look out for the fact that the line input only handles 0.775 volts PEAK and a lot of line sources exceed that.
I had to get a resistive pad cable (-11 dB is the one I found which worked for my setup) in order to properly utilize the line input on that machine.
Also, I think I recall that setting the line input level at anything other than 100 is akin to digital zoom? (looks like the max is 127. check this note from Ozpeter)
100 is accepted as being unity digital gain.See http://www.2090.org/zoom/bbs/viewtopic.php?t=9745&start=0 for an H2 FAQ.




Been a long time since I sold the unit to a friend who loves it for field recording nature sound effects to mix with music.


« Last Edit: July 09, 2021, 12:36:32 AM by morst »
https://toad.social/@morst spoutible.com/morst post.news/@acffhmorst

Offline BradleyJY15

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 174
  • Gender: Male
Re: Best budget setup for newbie?
« Reply #3 on: July 09, 2021, 09:13:27 AM »
I started out with Core Sound Mics.  They have options as stated above starting around $100 (what I started with).  I then went to a $300 model, then $1000 or so, added some other things...Just kept upgrading. They are easy to use, unlike many others that require additional cabling or powering.  And they are VERY small, so can be used in many different ways or setups.

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1626
    • How I Escaped My Uncertain Fate
Re: Best budget setup for newbie?
« Reply #4 on: July 09, 2021, 09:33:52 AM »
I started with the Core Sound low-cost stealthy cardioids as well, and they're definitely affordable and tiny. They are also lacking in low end, though, which is why I finally ditched them. (The Core Sound binaurals, by contrast, have excellent sound, even the cheap ones.)

If I had it to do all over again, I would start out with the mics I'm using now: AT 853s, which have great sound for the price and also allow you to later purchase omni caps and swap those out depending on taping circumstances.) They're currently $244 at Sound Professionals (with the low-sensitivity option for high volume shows — https://www.soundprofessionals.com/cgi-bin/gold/item/SP-CMC-4U), but they turn up regularly here in the Yard Sale for much cheaper, and they're sturdy enough that even a well-used pair should have plenty of life in it.

Offline Gordon

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 11780
  • Gender: Male
    • my list
Re: Best budget setup for newbie?
« Reply #5 on: July 09, 2021, 09:40:14 AM »
line audio makes some excellent mics for the money if you plan to open tape.
Microtech Gefell M20 or M21 > Nbob actives > Naiant PFA > Sound Devices MixPre-6 II @ 32/48

https://archive.org/details/fav-gordonlw

https://archive.org/details/teamdirtysouth

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 15700
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: Best budget setup for newbie?
« Reply #6 on: July 09, 2021, 10:28:38 AM »
Welcome Luke.

There is an AT853 microphone set (as recommended above) currently for sale in the yardsale here:
https://taperssection.com/index.php?topic=197252.msg2360382#msg2360382

You will need a relatively simple adapter cable to convert to the mini-jack input required by your recorder.  However, you will achieve better performance if you use a battery-box (a simple relatively small and inexpensive device) between microphones and recorder to power the microphones optimally.  Battery boxes with mini-xlr input and mini-jack output are available, or you can use the same adapter cable ahead of a battery box with a mini-jack input.

First rule of successful taping is to never setup so as to deprive your date of chutney!

Edit- If you plan to "open tape" as Gordon mentions, and wish to keep your investment minimal, you might consider the Nakamichi CM300 pair in the same listing linked above, which are generally well respected entry-level taping micrphones with a lot of taping cred history behind them.  Although the AT853 can be used for open taping as well and have a similar well respected taper history. The Line Audio mics are well-respected new mics, currently in production.  They are a good option that will run you a bit more and require phantom powering.
« Last Edit: July 09, 2021, 10:36:08 AM by Gutbucket »
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline Luke_of_Mass

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 2
Re: Best budget setup for newbie?
« Reply #7 on: July 12, 2021, 12:34:31 PM »
Thanks folks sorry I should have specified my budget - I'm willing to spend between $100 and $200 on gear - thanks for the leads on yardsale stuff - any idea where to buy a battery box?

Offline beatkilla

  • Trade Count: (70)
  • Needs to get out more...
  • *****
  • Posts: 2104
  • Gender: Male
Re: Best budget setup for newbie?
« Reply #8 on: July 12, 2021, 01:19:52 PM »
Thanks folks sorry I should have specified my budget - I'm willing to spend between $100 and $200 on gear - thanks for the leads on yardsale stuff - any idea where to buy a battery box?


I like this battery box and it will ship quickly.

https://www.soundprofessionals.com/cgi-bin/gold/item/SP-SPSB-8-MKII

Offline fireonshakedwnstreet

  • Trade Count: (8)
  • Taperssection Member
  • ***
  • Posts: 835
  • Gender: Male
  • David
Re: Best budget setup for newbie?
« Reply #9 on: July 12, 2021, 02:12:49 PM »
As others have noted, AT 853s are small and give you options for open or stealth and multiple caps. Happy Taping!
Mics: AT 3031; AT 853Rx (c, o); Samson C02; Studio Projects C4 (c, o, h); Nak 300/Tascam PE-125/JVC M510 (cp-1, cp-2, cp-3, JVC M510 superdirectional caps)
Recorders: Tascam DR-680 MkII; Tascam DR-70D
Pres: Edirol UA-5 (Oade PMod & WMod); Marantz PMD661 (OCM); Marantz PMD620 (Oade WMod); Naiant MidBox; Shure FP11 (x2)
https://archive.org/details/@fireonshakedwnstreet

Offline vantheman

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 209
  • Gender: Male
Re: Best budget setup for newbie?
« Reply #10 on: August 06, 2021, 04:57:51 PM »
Below in my signature is my entry level setup. It’s been serving me well in a stealth environment, and well in open scenarios too.
AT U853A (SP-CMC-4U) > SP-SPSB-10 12V > Sony A10
Line Audio CM4/OM1> Sound Devices MixPre6ii or Tascam DR100 mkiii

 

RSS | Mobile
Page created in 0.096 seconds with 36 queries.
© 2002-2024 Taperssection.com
Powered by SMF