Become a Site Supporter and Never see Ads again!

Author Topic: ISO 3/8" adapter stud for top of stand to add longer 3/8 thread on top  (Read 228 times)

0 Members and 1 Guest are viewing this topic.

Offline waltmon

  • (14)
  • Needs to get out more...
  • *****
  • Posts: 2021
  • Gender: Male
Anyone found an adapter for the top of your mic stand to increase the length of the 3/8" stud? I want to screw on a stereo bar and have enough  thread left to screw on a threaded active mount center of the stereo bar. Thanks all.
« Last Edit: October 03, 2021, 12:55:45 PM by waltmon »
KM140's, KM150's, U89's, Mixpre-10T II, Mixpre-6 (1st gen), 788T

CA-14 > UBB > Tascam DR-2D

1 pound non-sequential $50.00 bills

Offline IMPigpen

  • (0)
  • Taperssection Regular
  • **
  • Posts: 220
Mics: Neumann KM184s; ADK TLs; Naiant X-R omnis & cards; MM-BSM-7M omnis
Pres/Battery boxes: Sound Devices MixPre; Naiant IPA; Sound Professionals SP-SPSB-6
Recorders: Tascam DR-70mkii; Tascam DR-60Dmkii; Tascam DR-40; Roland R-07
Cassette Transfers:  Nakamichi CR-1A->Tascam DR-60Dmkii
DAT Transfers:  Tascam DA-20mkii->Marantz PMD-670

My LMA uploads:  https://archive.org/details/@brandon_smith

**Have any old Strangefolk or Eddie From Ohio shows not on the LMA?  Let me know!**

Offline Gutbucket

  • record > listen > revise technique
  • (15)
  • Needs to get out more...
  • *****
  • Posts: 14362
  • Gender: Male
  • Gunther Theile nailed it!
Re: ISO 3/8" adapter stud for top of stand to add longer 3/8 thread on top
« Reply #2 on: October 04, 2021, 09:36:50 AM »
A 3/8" threaded stud of sufficient length as posted above + a 3/8" threaded coupler.  Use thread-locking compound between stud and coupler or a torqued down lock nut to form a semi-permanent single part with a female 3/8" on one side and a male 3/8" of the length you need on the other.

Theaded coupler example-
https://www.boltdepot.com/Product-Details.aspx?product=23836&qty=1&gclid=CjwKCAjwzOqKBhAWEiwArQGwaEks1JKoD_C4y9w_SLA9Ii_B7u6wm7wiN2W10SHyNFNOUd6dxRidURoCzTIQAvD_BwE
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline dactylus

  • Site Supporter
  • (56)
  • Needs to get out more...
  • *
  • Posts: 5645
  • Gender: Male
  • Maplewood, MN
Re: ISO 3/8" adapter stud for top of stand to add longer 3/8 thread on top
« Reply #3 on: October 25, 2021, 09:02:40 AM »
Thanks for the info!
hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

 

RSS | Mobile
Page created in 0.039 seconds with 27 queries.
© 2002-2021 Taperssection.com
Powered by SMF