Gear / Technical Help > Microphones & Setup

ISO 3/8" adapter stud for top of stand to add longer 3/8 thread on top

(1/1)

waltmon:
Anyone found an adapter for the top of your mic stand to increase the length of the 3/8" stud? I want to screw on a stereo bar and have enough  thread left to screw on a threaded active mount center of the stereo bar. Thanks all.

IMPigpen:
This might be what you are looking for Walt.

https://www.bhphotovideo.com/c/product/1340622-REG/kupo_kg014712_1_conversion_adapter_3_8_16f.html/overview

Gutbucket:
A 3/8" threaded stud of sufficient length as posted above + a 3/8" threaded coupler.  Use thread-locking compound between stud and coupler or a torqued down lock nut to form a semi-permanent single part with a female 3/8" on one side and a male 3/8" of the length you need on the other.

Theaded coupler example-
https://www.boltdepot.com/Product-Details.aspx?product=23836&qty=1&gclid=CjwKCAjwzOqKBhAWEiwArQGwaEks1JKoD_C4y9w_SLA9Ii_B7u6wm7wiN2W10SHyNFNOUd6dxRidURoCzTIQAvD_BwE

dactylus:
Thanks for the info!

Navigation

[0] Message Index