Become a Site Supporter and Never see Ads again!

Author Topic: Anyone ever taken a Sony 7 pin optical cable apart?  (Read 3269 times)

0 Members and 1 Guest are viewing this topic.

Offline utahtaper

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 482
Anyone ever taken a Sony 7 pin optical cable apart?
« on: November 23, 2003, 09:22:36 PM »
I was just curious if it could be made into a 7pin>coax cable? Anyone seen inside the head?
« Last Edit: November 23, 2003, 09:31:06 PM by utahtaper »
Recording:
SKM 140's>LC3>ACM660

Playback:
Tascam DA30MKII DAT player
Jolida Tube CD player

Sota Saphire w/grado TLZ> Melos 333> Melos 400 monoblocks> Legacy Focus

Mcintosh MR71>c22>MC60 monoblocks

Offline Joe w.

  • esniper
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5034
  • Gender: Male
  • Turn JB Up
Re:Anyone ever taken a Sony 7 pin optical cable apart?
« Reply #1 on: November 23, 2003, 11:14:02 PM »
an optical cable is essentially glass. the construction and materials of the coax and optical cables is different.
2016 National Champions
five generations with an unlocked door and a loaded burglar alarm

Offline utahtaper

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 482
Re:Anyone ever taken a Sony 7 pin optical cable apart?
« Reply #2 on: November 24, 2003, 12:43:02 AM »
I thought I heard somewhere that they could be made into a coax cable since you only use the 7 pin head to make the active cable. Everything else is discarded.
Recording:
SKM 140's>LC3>ACM660

Playback:
Tascam DA30MKII DAT player
Jolida Tube CD player

Sota Saphire w/grado TLZ> Melos 333> Melos 400 monoblocks> Legacy Focus

Mcintosh MR71>c22>MC60 monoblocks

Offline Lee

  • Team Bama
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4868
  • Gender: Male
  • "I hate the f***in' eagles, man!"
Re:Anyone ever taken a Sony 7 pin optical cable apart?
« Reply #3 on: November 24, 2003, 01:07:26 AM »
as far as the 7pin>coax cables are concerned, are there any electronics in the 7pin head?  If not, it'd be a pretty sweet hack job to splice a 7pin>coax off of the pins inside the optical cable.  Hmm... wishing a had a 7pin>optical to destroy...
Denon AVR 3808ci > Paradigm Reference Studio 20 + Velodyne DLS 3750

Offline nic

  • Big In Japan
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4700
  • Gender: Male
    • half dead batteries
Re:Anyone ever taken a Sony 7 pin optical cable apart?
« Reply #4 on: November 24, 2003, 01:01:06 PM »
speaking of, I know someone here makes these but cant remember who.
I got a 7pin-> coax I/O and the input is messed up...can anyone rebuild this?(would prefer a complete rebuild/replacement of both coax connections.



the water's clean and innocent

Offline utahtaper

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 482
Re:Anyone ever taken a Sony 7 pin optical cable apart?
« Reply #5 on: November 28, 2003, 12:25:03 AM »
speaking of, I know someone here makes these but cant remember who.
I got a 7pin-> coax I/O and the input is messed up...can anyone rebuild this?(would prefer a complete rebuild/replacement of both coax connections.


I can rebuild it.

http://www.taperssection.com/yabbse/index.php?board=20;action=display;threadid=9205
« Last Edit: November 28, 2003, 12:27:20 AM by utahtaper »
Recording:
SKM 140's>LC3>ACM660

Playback:
Tascam DA30MKII DAT player
Jolida Tube CD player

Sota Saphire w/grado TLZ> Melos 333> Melos 400 monoblocks> Legacy Focus

Mcintosh MR71>c22>MC60 monoblocks

Offline Swanny

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 440
  • Gender: Male
    • Some shows...
Re:Anyone ever taken a Sony 7 pin optical cable apart?
« Reply #6 on: December 02, 2003, 09:02:35 PM »
You can use an optical plug. Just start hacking until you see the last board with the pins connected to it & solder to those.
Schoeps MK5/8 > KC5 > CMC6> Oade M148/Aerco MP-2 > Mytek 24192 > Tascam dr-100 mkiii

Offline utahtaper

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 482
Re:Anyone ever taken a Sony 7 pin optical cable apart?
« Reply #7 on: December 03, 2003, 01:18:58 AM »
You can use an optical plug. Just start hacking until you see the last board with the pins connected to it & solder to those.
That's kinda what I thought. I never had a reason to use the optical cable. Anyone out there got a broken one I can play with?
Recording:
SKM 140's>LC3>ACM660

Playback:
Tascam DA30MKII DAT player
Jolida Tube CD player

Sota Saphire w/grado TLZ> Melos 333> Melos 400 monoblocks> Legacy Focus

Mcintosh MR71>c22>MC60 monoblocks

Offline Cooker

  • Local Crew
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 8720
  • Gender: Male
Re:Anyone ever taken a Sony 7 pin optical cable apart?
« Reply #8 on: December 03, 2003, 03:34:45 PM »
i have a broken one, let me look for it tonight. might be gone already.... output still works but the input optical cable has a kink in it.

busknuckle

  • Guest
  • Trade Count: (0)
Re:Anyone ever taken a Sony 7 pin optical cable apart?
« Reply #9 on: December 03, 2003, 07:35:31 PM »
i have a broken one, let me look for it tonight. might be gone already.... output still works but the input optical cable has a kink in it.

just out of curiosity...where did you get that cable? I had an optical cable (active) that I included in the sale of my core sound cardioids. It had a kink in one of the cables.

 

RSS | Mobile
Page created in 0.066 seconds with 34 queries.
© 2002-2024 Taperssection.com
Powered by SMF