On the development: It seems like with the information that has already been shared, the general schematic for the electronics is known. What seems to be needed is working on the mechanics, colletts, integration, testing.
todd hit it on the head with the statement above. the development of the collettes at this point is a major factor in the delay on our part. the electronics are known. mechanics and integration are the hurdles
as i posted in the original thread, we are working on the collettes. its not as easy as simply screwing the cap to the collette threads. there is that darn center pin on the capsule to contend with, and let me tell you that darn center pin is a harder challenge that first anticipated. then there is the overall depth to make sure all the components and wiring fits and seats into the collette properly. then there is the matching of the collette "neck" so that it matches and is compatible with schoeps clips and bars (which was the easiest to tackle). etc. etc. but, on a bright side, the list is getting shorter
keep in mind, every time there is a design change and we need a few new collettes to be run off, it costs money and not to mention the time of the machinist who at this point is basically doing us a favor. compound that with our full time "non-taping&recording" jobs, our families (including young children), and our propensity to actually see live shows in our limited remaining free time and maybe you will realize it is not an overnite endeavor.
i want to see the final product as much as the next guy whether our solution or someone elses, but ask yourself...would you rather have a quality final design (ala the nbox for instance), or .....
patience IS a virtue