Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: Sterling on October 22, 2003, 02:39:24 PM
-
Does this unit have a digital out that I could convert with my CO2 into optical? That is till I get a dat (slowly fella's...slowly ;)) I found a used one so I can finally start my rig...woo hoo! :afro:
Sterling
-
Go to Radio Shack and get the gold-plated BNC to coaxial adaptor. It costs about $5. You will screw the BNC end onto the connector on the front of the unit and plug in your digital RCA cable to it.
-
Just to be sure is it an acd-20 or an ad-20?
-
So I just need the adaptor and then its a COAX not an RCA right? And yes it is the G.P. ADC-20 not the zefiro inbox or AD20. I found a used one for 260 with battery pack and recharger....is that good? Thanks
Sterling
-
Wait just a minute...DMIC20 and ADC20? I think I fucked something up....man I must look like a total jack ass but I'm sure its a DMIC20 that I'm looking at. Oh shit I'm sorry guys.....I'm not worthy ??? ??? ???
Signed,
:-\
-
dmic and adc20 both have the same outputs... it is a bnc connector, get the adapter Jamie recommended and you'll be fine
-
Also be aware that the Dmic is a PRE and AD and the adc is JUST an AD. If it's a dmic for $260 you got a good deal. :)
-
Also be aware that the Dmic is a PRE and AD and the adc is JUST an AD. If it's a dmic for $260 you got a good deal. :)
no doubt...
-
So I just need the adaptor and then its a COAX not an RCA right?
The digital coaxial cable you need has RCA connectors on the end. Buy this also at Radio Shack; I have heard good things about their digital coaxial cables.
-
If you get a dmic-20 you should look into getting the mod for $100 of do it yourself(its not hard). It allows you to adjust the levels and not use those stupid dip switches. This thing sounds great with oktavas. I run that combo for a couple of weeks