Gear / Technical Help > Ask The Tapers

MixPre 10ii > 1/8"mm stereo line out to USB-C hub?

(1/2) > >>

FOB_Taper:
I want to feed my DPA 4022 mics via MixPre 10ii line out to a USB-B hub to feed an Apple iPhone 16max. Anyone ever try this type of setup? How can I setup the line out levels going into the iPhone? Any latency issues?
Need to feed stereo audio to video capture using Apple Final Cut Camera app on iPhone 16.

aaronji:
Wouldn't you need an ADC in there? Maybe you can go USB out, though.

FOB_Taper:
Comica Audio CVM-D-UC II 3.5mm TRS to USB-C Coiled Audio Adapter Cable with ADC Chip (2'): https://www.comica-audio.com/product/CVM-D-UC-II

I put in a tech support question with Kondor. Asked if the hub requires an analog or a digital source.

They do make 1/8" mm TRS to USB-C with ADC chips, see the Comica Audio cable above.

goodcooker:
I would think the USB C output would be the way to go for this.

I have a 6i not a 10ii so this may not look exactly the same but you can select what goes to USB outputs in the output menu then select USB Audio (instead of power) for the USB C in the system menu.

FOB_Taper:
From the SD User Manual: So digital out signal via USB

Navigation

[0] Message Index

[#] Next page

Go to full version