What gain setting did you use on the 9100? and on your edirol? How were the mics angled what technique was used? Just wondering.
The Edirol was on 53, I think, line in of course. The 9100 about "half way". The mics were angled in a slight V position towards one of the stacks, which were about 5 meters from me. The mics were mounted on a hat.
-c
The preamp should be at more then half way you are actually attenuating the signal that is why your signal to noise ratio is so bad. Try running the preamp at 95% and then back off your edirol input.
Chris
Chris,
I'd like to ask you a few questions , if you don't mind.
Just curious about your comments. As far as I can see, Colargol's R-09HR was set at just around Unity gain. So was the 9100
(volume at halfway=unity, roughly speaking), in this particular show the 9100 acting like a regular BB. Perfect scenario.
That being said, why did you say that the gain should be cranked up on the 9100 and reduced on the R-09HR to avoid a bad signal to noise ratio?
As a R-09HR user should I always use a preamp with the CA-14, even at loud shows? What if I just use a regular bb at loud concerts?
Thanks in advance.