Here is an active setup for the Milab VM44-link, using the supplied Milab mic mounts. The mic mounts are connected together using a 1.5" delrin "riser" from Darktrain, and then inserted into a Shure A53m shockmount. The setup provides a 20cm DIN spacing for the mics.
Here is the assembly outside of the Shure A53m:
I've also used a cheap shockmount, available for $5-10, for this setup. It has the benefit of having an open top, so the whole assembly can be shoved into the shockmount, rather than needing to assemble it inside of the A53m mount. The schoeps a20s or JoeMeek or Busman mounts can also be used.