Taperssection.com
Gear / Technical Help => Recording Gear => Topic started by: Nick in Edinboro on June 25, 2003, 01:53:36 PM
-
My JB3 should be here tomorrow. Curious to those users out there now, is there any firmware I *must* get before heading out to record? Do they generally come relatively up to date from Creative?
Anything else I should know, feel free to clue me in :D It'll be fed from a UA-5.
-
Nope, you should be just about good to go. I would reccomend updating the firmware though as soon as you get it, as the original releases sucked!
Daryan
-
I've done some research over at http://www.nomadness.net and it seems as if the highest you want to go (to be reliable) is firmware version 1.20.06
If you go past that firmware wise I guess people are having trouble with the unit locking up or not booting with anything past that?! ::)
-
i have firmware version 1.32.02p, and have had this sine the day i got it.
i have had no problems whatsoever.
-
i have firmware version 1.32.02p, and have had this sine the day i got it.
i have had no problems whatsoever.
Same here.
-
ditto
-
be careful with upgrading firmware too much... you can't downgrade
-
if my dmic-20 is set at 48k via internal crystal, could i even run a jb3 after the dmic cause its not at 44.1k???
thanks,
bean
-
The JB3 can record at 48K- but I think thats as high as she goes
-
+T tad, thanks for the ultra quick reply..... 8)
-
anytime :happy:
-
anytime :happy:
SUITE, thanks man...just inquiring, ya know..... 8) ;) :cheers: :clapping: :happy: