Taperssection.com
Gear / Technical Help => Recording Gear => Topic started by: jb63 on October 18, 2020, 07:10:53 PM
-
https://www.sounddevices.com/linking-multiple-7-series-recorders-using-c-link/
I swear this pandemic is just costing me ideas.
Has anyone done this successfully?
A comment on 788T stuff recently made me look back into running 2 digital inputs into a 744T and this is where I ended up.
Help me waste some time.
-
seems like it would sync the word clock between units to keep all analog inputs in sync
any digital inputs would still be on their own clock, unless you have a way to feed the synchronized word clock from the sound devices units back to the ADCs you are using to generate the digital signal. generally any stand-alone ADC has the ability to take a word clock input and use that as its reference
-
once about 12 yrs ago. we ran three 722s.
it was problematic. forget what happened but we didnt try again.
we've used the clock sync with great results
-
Here it is:
https://www.sounddevices.com/702t-744t-digital-inputs-and-time-code/
sounds like a giant pain in the ass just to get 2 digital signals in sync.
-
Even though SD only mentioned Ambients units in the FAQ - a UltraSync ONE should work as it is capable of outputting all sync modes. Timecode, genlock & word clock on its two output.