Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: RMayberry on April 07, 2014, 11:58:12 AM
-
I am getting an Edirol UA-5 and I want to run a digital(coax) line level signal through it and need to know if I am not using "phantom power" can I power it via USB?
Basically I want to use it as a digital USB sound card.
Thanks.
Rick
-
A Edirol UA5 / 9v / Size M, 5.50mm OD × 2.10mm ID / Center pin (-) Ring (+) Reverse Polarity / Know to run off 7.2v w/ no issues
To the best of my knowledge, it cannot be powered by 5v USB power.
-
A Edirol UA5 / 9v / Size M, 5.50mm OD × 2.10mm ID / Center pin (-) Ring (+) Reverse Polarity / Know to run off 7.2v w/ no issues
To the best of my knowledge, it cannot be powered by 5v USB power.
correct
The USB port if for connection only not power