Become a Site Supporter and Never see Ads again!

Author Topic: Material make up of the Sony PCM-M10?  (Read 2197 times)

0 Members and 1 Guest are viewing this topic.

Offline infobleep

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 13
Material make up of the Sony PCM-M10?
« on: April 15, 2023, 11:49:03 AM »
How much metal is there in the Sony PCM-M10?

Some venues have scanners you walk through or wands.

I have in the past got the device through such places but I don't know if that was down to luck or not.

Offline tim in jersey

  • Site Supporter
  • Trade Count: (8)
  • Needs to get out more...
  • *
  • Posts: 3792
  • Gender: Male
Re: Material make up of the Sony PCM-M10?
« Reply #1 on: April 15, 2023, 08:06:42 PM »
I've gotten mine past walkthroughs and wands multiple times as have others here...

Offline live2cd

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 376
  • Gender: Male
    • Facebook.
Re: Material make up of the Sony PCM-M10?
« Reply #2 on: May 14, 2023, 10:16:15 PM »
I think its all about sensitivity at the detector you're at. Mine used to set off wands/walk thrus every show and I would wrap earbuds around it and explain it was a radio. After this happened 4 out of every 5 shows, I just put the M10 with earbuds in the tray and told them about the "radio" to avoid them catching it in my pants. The A10 is the far better option with less metal. Very rarely gets detected, altho it has happened to me.
DPA 4060 [CS HEB] > CS BB
CA-14 (c) > CA 9200
CA-14 (o) > CA 9200
SP-CMC-8 Cardioids (4.7k mod) > SP-SPSB-11
pri deck: Sony PCM M10 | alt decks: TASCAM DR‑2D & Sony PCM A10


RSS | Mobile
Page created in 0.03 seconds with 26 queries.
© 2002-2024
Powered by SMF