Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: spreadheadtom on May 20, 2004, 04:04:00 PM

Title: SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
Post by: spreadheadtom on May 20, 2004, 04:04:00 PM

just want to ask some questions

Title: Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
Post by: Sean Gallemore on May 20, 2004, 04:11:22 PM

i ran it for a couple shows

Title: Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
Post by: spreadheadtom on May 20, 2004, 04:16:12 PM

will be getting the battery box in a few days and will be taping from the 3rd row john prine show---plan on using the d8--do i need to run line in?  any suggestions on settings for the box...

sorry to be stoopid

thanx!
 Tommy

Title: Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
Post by: Sean Gallemore on May 20, 2004, 04:20:57 PM

don't be sorry

yes, line-in is good.  Does the Battery box have roll-off?  If it does, set it between 69-95 htz, but it doesn't matter much going line-in.

stealth or open tapin?

Title: Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
Post by: spreadheadtom on May 20, 2004, 04:23:54 PM

It does have the roll off---stealth show

Title: Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
Post by: Sean Gallemore on May 20, 2004, 04:25:58 PM

you know how yer gonna run it all stealth like from 3rd row?

Title: Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
Post by: spreadheadtom on May 20, 2004, 04:27:00 PM

no idea.....any suggestions?

Title: Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
Post by: Sean Gallemore on May 20, 2004, 04:35:14 PM

here's what I'd do:

D8 in sweater.  Cut tiny whole in sweater to run the cord under the sweater, up your back.  Wear a backwards baseball cap.  Run the caps into the cap up your neck into the sweatband of the baseball cap.  As long as you don't pull on the cable the fabric won't rub on the cap and make any noise.  If the sweater has a hood, you can bunch the hood up to hide the cable.

You can arrange the caps on the side of your head so they are facing forward, or more towards the back like DIN or ORTF.

But there are many other ways

Title: Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
Post by: keepongoin on May 20, 2004, 04:38:17 PM

tommy - thanks for reminding me that i need to run by the hat store today.

Title: Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
Post by: spreadheadtom on May 20, 2004, 05:02:12 PM

Sounds good---only problem is with the sweater---it was 89 degrees here today

+t for the help though

greatly appreciated!!