Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: bdasilva on February 17, 2017, 02:34:52 PM
-
It is always such a hassle to ask a soundguy you don't know to "borrow" two lines to get your mics from the stage to the soundboard... Or having to ask him/her to send the FoH signal to the stage for you... Do you think this system might work? You could place the omni mics where you need them... or I use cad E300S that have built in phantom power... I think this would work (two sets of course) all this is taken from the ENG/Film bunch that come along with owning a F8?
https://www.amazon.com/BOYA-Wireless-Lavalier-Microphone-Camcorder/dp/B01BD7EKTK
this system can be had for 110$ (tomtom)
-
If you have the dr-40 why not just leave that at the board separate of your rig? That's what I've been doing lately. All comes together in post.