Topic: Gaps with burning DVD-As with wavelab...

[RobC]

[
....the player is a samsung HD841...just a rebadged Toshiba 4960, which I think people have used successfully so I dont think it is that, but I want to rule it out...

I have a samsung HD841 and get split second gaps with the DVD-As i make with disc welder bronze.
So I wouldn't be suprised if maybe the player may have something to do with it.

what happens is my reciever unlocks and relocks on the digital signal during track changes.
I've just been buning 24 bit DVD-As as one long track for each set now

[nickgregory]

[
....the player is a samsung HD841...just a rebadged Toshiba 4960, which I think people have used successfully so I dont think it is that, but I want to rule it out...

I have a samsung HD841 and get split second gaps with the DVD-As i make with disc welder bronze.
So I wouldn't be suprised if maybe the player may have something to do with it.

what happens is my reciever unlocks and relocks on the digital signal during track changes.
I've just been buning 24 bit DVD-As as one long track for each set now

that is exatly what happens with me...the receiver locks and unlocks on the digi signal......that sucks that it happens with discwelder as well...

[sygdwm]

pioneer 563a. no gaps. cheap. plays everything i throw in it.

[nickgregory]

pioneer 563a. no gaps. cheap. plays everything i throw in it.

the HD841 and the toshiba 4960 are the same units and I thought that people used the 4960s without gaps without issue...test will be when Craig gets the disc I sent either today or tomorrow and verifies if it has gaps at all....

here is a question, you running digi out of the 563a? 

[sygdwm]

yes

[nickgregory]

yes

ok....a guy on audiocircle.com posted that there is a firmware update that I am going to try to install when I get home...hopefully that takes care of it!  will post back with results...

[nickgregory]

flashed the firmware...good news is it loaded easily...bad news, still has gaps....

[sygdwm]

im telling you its the player, if you follow what i said you should have no gaps.

[nickgregory]

im telling you its the player, if you follow what i said you should have no gaps.

I am guessing that is what it is....Craig will be able to confirm that if the disc I sent him has gaps on it or not

[Craig T]

I received Nick's dvda.  No gaps on my player - Panasonic DVDF85.

im telling you its the player, if you follow what i said you should have no gaps.

I am guessing that is what it is....Craig will be able to confirm that if the disc I sent him has gaps on it or not

[nickgregory]

thanks Craig, +T...now to get on the phone with samsung...

[wboswell]

So I've finally gotten somewhere with burning from Wavelab...  I suppose the problem was with the pioneer dvdr-108 burner.  I'm using a borrowed external and having succes, sorta.  For some reason, I'm getting a split second gap between track(chapter) 1 and track 2.  No other audible gaps are heard when I listen to the rest of the disc.  Not a horribly bad thing as the first track is generally a lead-in track, but still, its a little odd.  I'm guessing that its a setup thing, but I've run through it twice now with the same results...

On another note, my Denon 2900 will output/pass a digital signal with the discs burned in Wavelab.  The discs authored in Discwelder Steel(that Damon has sent) will only output the left channel to an external DAC.

[RobC]

thanks Craig, +T...now to get on the phone with samsung...

I think my Samsung my become my Living room movie player and I will get a new one for the stereo
it would be nice to have tracked out DVD-As

[nickgregory]

I think my Samsung my become my Living room movie player and I will get a new one for the stereo
it would be nice to have tracked out DVD-As

agreed, I believe mine will be going on ebay tomorrow

[wboswell]

anyone had a hard time with the toshiba 4690 not playing well with Wavelab burned discs?  I just sent a few to a friends and he says they are not playing well together...

thanks