Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: Ray76 on May 21, 2005, 05:39:27 PM

Title: What kind of bar do i need to run 4 mic mixes, if there is such a thing..
Post by: Ray76 on May 21, 2005, 05:39:27 PM

I pretty much will be running my c4s/mgs on the outside, split cardioids, and the at 4050s in the middle, either as fig. 8 or omnis. any suggestions for a bar to do this???

Title: Re: What kind of bar do i need to run 4 mic mixes, if there is such a thing..
Post by: Ray76 on May 21, 2005, 06:11:13 PM

Quote from: m0k3 on May 21, 2005, 06:05:39 PM

K&M makes a 4 mic bar
It has 5 holes, one for the stand mount, 4 for mics. I think tht they might call it a 5 mic bar because its conceivable to mount a mic straight-up over the top of the stand mount?

thanks mok3!you are a gentleman and a scholar/

ray

Title: Re: What kind of bar do i need to run 4 mic mixes, if there is such a thing..
Post by: Stumptown Matt on May 25, 2005, 07:20:17 PM

Try here  http://www.micsupply.com/standaccessories.htm

Scroll down and you'll find a couple of items that may work for you.

look at the ST4 Sabra T Mount and the Bogen Triple Mic T-Bar.  I'm sure you could get more of the little adapters to use it for 4 mics instead of 3 on the Bogen.  Also beware that the Sabra "T" bars are kind of crappy.  I believe AKG makes a 4 mic version of their rock solid "T" bar.

Title: Re: What kind of bar do i need to run 4 mic mixes, if there is such a thing..
Post by: Ray76 on May 25, 2005, 07:23:34 PM

Quote from: Graabir Boubi on May 25, 2005, 07:20:17 PM

Try here  http://www.micsupply.com/standaccessories.htm

Scroll down and you'll find a couple of items that may work for you.

Thanks a bunch hoss. +T
ray