Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: kkaye on January 23, 2004, 10:50:56 PM
-
I have a question on sample rates.
I have been using 44.1 when Ive been patching
(having problems converting 48 to 44.1 to burn cds, but thats another story, )
When patching is it a problem if I have my D8 set to 44.1 and the incoming signal is 48?
Im asking because I think this might have caused some diginoise my last time out, otherwise I havent had problems before.
Thanks for any tips.
-
ok, you will pick up whatever the lead deck has if its all a digital line of patches. doesnt matter what your deck is set at if you are going in digitally.
-
OK, thanks, and I am using a oade 7pin for patching,
I guess there is something else behind the weird diginoises last time out.
-
could be his deck. could be your 7 pin. could be your transfer. could be your deck. lots of possabilities
-
could be his deck. could be your 7 pin. could be your transfer. could be your deck. lots of possabilities
could be his cable
-
could be your heaeds on your deck