Gear / Technical Help > Post-Processing, Computer / Streaming / Internet Devices & Related Activity

Glitches in soundboard feed, any chance for recovery?

(1/2) > >>

Dan33185:
I recently recorded Wayne Hancock and was able to get a feed off the soundboard. I used 1/4" > Tascam DR-60D, and I noticed in post there were a lot of little glitches throughout the recording. I use the "click/pop eliminator" in Audition, but that doesn't seem to have helped it much. I'm guessing the recording is a lost cause, but I figured I'd ask here to see if anyone had any ideas. Sample below:

https://drive.google.com/file/d/1rliQaHDekQwByq3oscd-CUuMn-c6pQjD/view?usp=sharing

grawk:
https://drive.google.com/file/d/1nSTVHxsz3xHDYhtCbCb6aQIF2cYky3JV/view?usp=drive_link

that was a quick hit with spectral repair in rx 10

Dan33185:

--- Quote from: grawk on March 21, 2024, 11:34:21 AM ---https://drive.google.com/file/d/1nSTVHxsz3xHDYhtCbCb6aQIF2cYky3JV/view?usp=drive_link

that was a quick hit with spectral repair in rx 10

--- End quote ---

Didn't even think of using that  :banging head: Thanks for doing that, definitely gives me hope I can salvage it.

grawk:
just select as close to the noise as you can

adrianf74:

--- Quote from: grawk on March 21, 2024, 11:42:55 AM ---just select as close to the noise as you can

--- End quote ---
Exactly this.  RX does a great job in fixing a lot of lost cause recordings.

Navigation

[0] Message Index

[#] Next page