Become a Site Supporter and Never see Ads again!
« previous next »
Pages: 1 [2]  All   Go Down

Author Topic: Help :Very low signal (Neumann)  (Read 5588 times)

0 Members and 1 Guest are viewing this topic.

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: Help :Very low signal (Neumann)
« Reply #15 on: September 24, 2011, 02:04:21 PM »
Quote from: chrisv31 on September 24, 2011, 09:56:14 AM
Page,
I'm going to test my ring for the first time in situation (gig in a small venue) next wednesday.

Ok, Im interested in your results in a loud place concert area, you may still need more gain than the LS10 can provide, but it will give a better idea of how much you are missing. I've found I can't ever replicate the loudness anywhere else so home based volume tests never worked for me.
Logged
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline chrisv31

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 88
  • Gender: Male
Re: Help :Very low signal (Neumann)
« Reply #16 on: September 26, 2011, 04:23:46 AM »
Thanks for the information about the  mixpre !
Logged
DPA 4061 + MPS 6030 + LS 10 Olympus
NEUMANN KM140 + Neumann BS48i-2

Offline chrisv31

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 88
  • Gender: Male
Re: Help :Very low signal (Neumann)
« Reply #17 on: October 18, 2011, 05:49:23 AM »
I've tried my Neumann with my power supply in a small venue (mics in a hat) recorder LS10 mic in (rec level 6) mic sense hi
and I'm very disappointed with the result

You'll find a sample below, could you tell why my recording seems overloaded ? :(
« Last Edit: October 18, 2011, 05:51:38 AM by chrisv31 »
Logged
DPA 4061 + MPS 6030 + LS 10 Olympus
NEUMANN KM140 + Neumann BS48i-2
Pages: 1 [2]  All   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.055 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF