Taperssection.com
Gear / Technical Help => Cables => Topic started by: Chanher on April 11, 2004, 08:06:39 PM
-
My brand new ICR-201's are not fitting on my standard rca female plugs. I would have to push way too hard to get them to slip into place, I do not want to break my gear. is there anything I can do? I'm also waiting for a response from zaolla, thanks!
-
the are professional rca plugs, you have to unscrew them a couple of times, plug them up, then screw them back, making it a tight fitting
remember when you go to take them off the fRCAs you will need to do the opposite or you run the risk of damaging the plugs.
-
nice, +t
-
the are professional rca plugs, you have to unscrew them a couple of times, plug them up, then screw them back, making it a tight fitting
remember when you go to take them off the fRCAs you will need to do the opposite or you run the risk of damaging the plugs.
Word Nick. Unscrew the RCA shell a few times, then place the male Zaolla connector on the female connector of your gear, then screw it back down tight. This ensures a super tight grip.
-
nice, +t
Did you get it to work Chris?
-
sure did :)
-
gotta love a nice rca connection, its either that or locking xlr's.....
-
gotta love a nice rca connection, its either that or locking xlr's.....
these are locking RCAs
-
i gotcha nick, im just saying, anything that "locks" makes me feel a lil better
-
i gotcha nick, im just saying, anything that "locks" makes me feel a lil better
fair enough, and agreed!
-
i gotcha nick, im just saying, anything that "locks" makes me feel a lil better
fair enough, and agreed!
;D
:)