Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: bgalizio on July 29, 2007, 01:11:29 PM
-
Does anyone here run a V2 > R-09 for the back half of their rig? I'm thinking that would be a nice, small set-up (if a V2 could ever be found, that is). I don't think anyone is running this with Pelusos, but I'd still like to hear comments on the sound.
If so, would it be preferable to go XLR out or RCA out, considering you're going to a mini jack on the R-09.
-
i ran mk4 > v2 > r09 for a minute. great sounding, very compact setup. highly recommended!
i ran xlr > mini, i've actually never used the rca out on my v2. not really sure if there is an advantage to one or the other.
-
i ran mk4 > v2 > r09 for a minute. great sounding, very compact setup. highly recommended!
i ran xlr > mini, i've actually never used the rca out on my v2. not really sure if there is an advantage to one or the other.
Thanks for the reply! I was thinking the sound quality would be pretty good, as from what I've heard the R-09 A/D is pretty good.
Now that you have a 722, when is your V2 for sale :)
-
Now that you have a 722, when is your V2 for sale :)
You have it all wrong: it's because of the 722 that he won't sell his V2. :P
-
Now that you have a 722, when is your V2 for sale :)
You have it all wrong: it's because of the 722 that he won't sell his V2. :P
Shhhh! Don't tell him that!
-
i'll be buried with my v2
edit: actually i'll trade the v2 + $100 for a v3 >:D
-
When you did run the V2 > R-09 combo, did you have to attenuate the signal at all? Or could you run the R-09 at unity just fine?
-
When you did run the V2 > R-09 combo, did you have to attenuate the signal at all? Or could you run the R-09 at unity just fine?
i'd leave the r09 set at 8 and adjust the levels on the v2
-
I think using the RCA outs on the V2 would match up much better with the R-09. Then you'd be staying with the unbalanced signal that's not as hot as the XLR outs.
This way you should be able to adjust your mic levels without having to worry about overloading the R-09's input.
-
just got ahold of an r9 myself, and was wondering the same thing.
-
How about a V3 >analog out > R-09? I'm very unschooled in the dBu stuff... would I need attenuators running analog out to the R-09?
-
How about a V3 >analog out > R-09? I'm very unschooled in the dBu stuff... would I need attenuators running analog out to the R-09?
I ran V3>R09 once, and didn't need attenuators. I ran the V3 at around 10 0' clock and had the R09 at 7. I was running Schoeps CMC/MK4 FWIW. If running hotter mics or a board feed your mileage may vary.