Taperssection.com
Gear / Technical Help => Cables => Topic started by: bagtagsell on January 12, 2005, 10:18:09 PM
-
Making an AES cable, do I have the pin assignments right?
1. ground
2. +
3. -
Is it the same for the male and the female? Or is pin 2 and 3 reversed for female?
-
Making an AES cable, do I have the pin assignments right?
1. ground
2. +
3. -
Is it the same for the male and the female? Or is pin 2 and 3 reversed for female?
you are correct. same assignments for both male and female, although pins 1 and 2's positions will be reversed.
marc
edit: whoops. didn't type what i was thinking.
-
as I understand this is the pin assignments
male female
1. 2. 1. 2.
3. 3.
1. Ground 1. Ground
2. Red (+) 2. Red (+)
3. White (-) 3. White (-)
-
as I understand this is the pin assignments
male female
1. 2. 1. 2.
3. 3.
1. Ground 1. Ground
2. Red (+) 2. Red (+)
3. White (-) 3. White (-)
female would be:
2 1
3
so she can mate with the male.
marc