Taperssection.com

Gear / Technical Help => Cables => Topic started by: shaggy on January 17, 2006, 07:48:03 PM

Title: RA BNCs?
Post by: shaggy on January 17, 2006, 07:48:03 PM

Anyone played around with these?  Life would be helluvalot easier if I could get a RA BNC to RCA set up for the vms02ib.  Any info/help would be appreciated.

Title: Re: RA BNCs?
Post by: Kyle on January 17, 2006, 08:18:42 PM

There was a pic a while back of a leegeddy cable that had a ra bnc

I need one of these as well - I have an adaptor, but I do not like adaptors


probably doesn't help much :)

Title: Re: RA BNCs?
Post by: cmoorevt on January 17, 2006, 08:48:43 PM

Markertek sells em.  I have used the TecNec right angle version of the connector shown here when making a RA bnc>RA RCA coax cable:

http://www.markertek.com/SearchProduct.asp?item=B%2DMQWIK&off=4&sort=prod

It is solderless, but you'll need a crimping tool.

They also sell a no-name version which looks like the one leegeddy had on that cable you mention:
http://www.markertek.com/SearchProduct.asp?item=9004&off=3&sort=prod

Title: Re: RA BNCs?
Post by: macdaddy on January 17, 2006, 08:49:17 PM

wayne over at boldercables used to modify the art dio with a bnc out. with mine, i have a VERY sturdy bolder bnc > RCA male cable. you might wanna ask him if he can make you one w/ a right angle bnc. very nice guy (which reminds me, i have to send him my sb2 tomorrow ;) ). that is where i would start looking for any bnc > rca cable. you can tell him i sent ya...

Title: Re: RA BNCs?
Post by: dgodwin on January 17, 2006, 09:34:52 PM

anyone have any suggestions for a bnc (2x) -> 1/8" stereo cable?  I'd prefer RA's but I'd take anything I can get.  I have bnc -> XLR, and bnc -> RCA cables, but with a R1 on the way, I need something that terminates in 1/8" stereo.  Should I just use BNC -> RCA adapters, and then a decent RCA-> 1/8" stereo cable?  Sorry for the threadjack!

Title: Re: RA BNCs?
Post by: todd e on January 18, 2006, 08:38:37 AM

Quote from: dgodwin on January 17, 2006, 09:34:52 PM

anyone have any suggestions for a bnc (2x) -> 1/8" stereo cable?  I'd prefer RA's but I'd take anything I can get.  I have bnc -> XLR, and bnc -> RCA cables, but with a R1 on the way, I need something that terminates in 1/8" stereo.  Should I just use BNC -> RCA adapters, and then a decent RCA-> 1/8" stereo cable?  Sorry for the threadjack!

check this cable out, one of Marc's last shipments, before his 'hiatus'
(http://img.photobucket.com/albums/v168/tedgerto/138_3828.jpg)

(2) BNC > 1/8" Mini-stereo plug

Title: Re: RA BNCs?
Post by: dgodwin on January 18, 2006, 07:32:22 PM

Quote from: todd e on January 18, 2006, 08:38:37 AM

Quote from: dgodwin on January 17, 2006, 09:34:52 PM

anyone have any suggestions for a bnc (2x) -> 1/8" stereo cable?  I'd prefer RA's but I'd take anything I can get.  I have bnc -> XLR, and bnc -> RCA cables, but with a R1 on the way, I need something that terminates in 1/8" stereo.  Should I just use BNC -> RCA adapters, and then a decent RCA-> 1/8" stereo cable?  Sorry for the threadjack!

check this cable out, one of Marc's last shipments, before his 'hiatus'
(http://img.photobucket.com/albums/v168/tedgerto/138_3828.jpg)

(2) BNC > 1/8" Mini-stereo plug

Does anyone know what cable he used to make that?  The 2 bnc cables I have all ready are made with canare LV 61s.  Also, what 1/8" stereo plug is that (anyone know?)

Title: Re: RA BNCs?
Post by: flipp on January 18, 2006, 07:40:38 PM

Don't know about the cable but the plug is probably a Canare F12.

Title: Re: RA BNCs?
Post by: todd e on January 19, 2006, 08:46:27 AM

Here is the link to the rest of the pictures of the cable/stealth rig I use.
http://taperssection.com/index.php?topic=49222.0