when you say all the drivers, you are talking about the other hardware drivers, right (specifically for the 1394 ports?) lemme know, thanks!
You need several pieces of software in place for the NJB3 to be fully functional:
[1] NJB3 firmware for the NJB3 to function
[2] PC drivers to enable firewire
[3] PC drivers to provide connectivity between Windows and NJB3
[4] File Manager software to provide a view/edit interface to the NJB3
Windows ought to have your firewire (1394) drivers already installed and running.
Sounds like you've taken care of [1]. Windows should have taken care of [2] already. So now you need [3] and [4].
[3] There's a separate set of NJB3 drivers which must be installed on the PC in order for Windows to recognize the NJB3 over the firewire port/cable. These drivers should have come on a CD with your NJB3. Nomadness also hosts the
driver upgrades.
[4] In addition to the drivers above which provide connectivity between Windows and the NJB3, you'll need another set of software to provide an interface that allows you as a user to view and edit the contents of the NJB3. There are two options: Creative's
File Manager software or Redchair Software's
Notmad Explorer. FWIW, I recommend
Notmad Explorer, it's a far better piece of s/w, IMO. Check out the trial, and if you like it - buy it. It's only $20.