Become a Site Supporter and Never see Ads again!

Author Topic: ISO a custom cable  (Read 2115 times)

0 Members and 1 Guest are viewing this topic.

ThePiedPiper

  • Guest
  • (0)
ISO a custom cable
« on: April 15, 2019, 07:00:06 AM »
I am in need of a cable and was curious if someone could build one for me. I need it by May 4 (if at all possible).

3.5mm (3 Pole Female) to dual XLR (3-Pin Male) Right Angle Stubbies.
The stereo signal divided into a left and right signal on each of the XLR ends.
Basically like the enclosed picture but with right angle stubbies to cut down on size.

Let me know.
Thanks in advance.
Andrew
« Last Edit: April 15, 2019, 07:40:26 AM by ThePiedPiper »

Offline goodcooker

  • (39)
  • Needs to get out more...
  • *****
  • Posts: 3664
  • Gender: Male
  • goes to 11
Re: ISO a custom cable
« Reply #1 on: April 15, 2019, 09:37:43 AM »

I recommend Ted Gakidis for custom cable needs. He does great work. His cable sales thread is in the retail space. His stubby connectors are good quality.

Just check your recorder and be ready to give the desired exit angle for the stubby connectors.
rig in transition during temporary hiatus

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline vanark

  • TDS
  • (29)
  • Needs to get out more...
  • *****
  • Posts: 7870
  • If you ain't right, you better get right!
    • The Mudboy Grotto - North Mississippi Allstar fan site
ISO a custom cable
« Reply #2 on: April 15, 2019, 10:13:15 AM »
Ditto on the recommendation of Ted.
If you have a problem relating to the Live Music Archive (http://www.archive.org/details/etree) please send an e-mail to us admins at lma(AT)archive(DOT)org or post in the LMA thread here and we'll get on it.

Link to LMA Recordings

Link to Team Dirty South Recordings on the LMA

Mics: Microtech Gefell M21 (with Nbob actives) | Church Audio CA-11 (cards) (with CA UBB)
Pres: babynbox
Recorders: Tascam DR-60D | Tascam DR-40 | Sony PCM-A10 | Edirol R-4

ThePiedPiper

  • Guest
  • (0)
Re: ISO a custom cable
« Reply #3 on: April 15, 2019, 06:42:01 PM »

I recommend Ted Gakidis for custom cable needs. He does great work. His cable sales thread is in the retail space. His stubby connectors are good quality.

Just check your recorder and be ready to give the desired exit angle for the stubby connectors.

Thank you, Sir. I appreciate the info. I have contacted him and everything is in the works.
 :coolguy:

 

RSS | Mobile
Page created in 0.03 seconds with 27 queries.
© 2002-2021 Taperssection.com
Powered by SMF