Become a Site Supporter and Never see Ads again!

Author Topic: phasing from auto limiter  (Read 664 times)

0 Members and 1 Guest are viewing this topic.

Offline seethreepo

  • (9)
  • Taperssection All-Star
  • ****
  • Posts: 1154
  • Gender: Male
  • Resist Or Serve
phasing from auto limiter
« on: June 14, 2021, 04:43:39 PM »
is there an overall fix for something recorded with a limiter engaged?
"Never heard anyone say that music was the thing that fucked up their day" 
-Chris Robinson 1996-09-24

 real recorder > phone
 external mics > Internal mics
 FOB > Taper Section
 HATS > better than Denied

Offline Gutbucket

  • record > listen > revise technique
  • (15)
  • Needs to get out more...
  • *****
  • Posts: 14377
  • Gender: Male
  • "and the rowers keep on rowing!"
Re: phasing from auto limiter
« Reply #1 on: June 14, 2021, 06:04:14 PM »
In practical terms, not really.

Technically, if there is some dynamic variation remaining within the active limiting band between the limiting threshold and peak and the exact parameters of the limiting that was previously applied are known, an expander with identical (inverse) parameters can be applied to reverse the effect of the limiting.

That is how various forms of pre/post-emphasis work, including RIAA filtering, Dolby and DBX noise reduction techniques.  The difference is that in those cases the post-emphasis filter is able to be carefully tuned to act as the exact inverse of the pre-emphasis filter, and it can be difficult to get exactly right even when all the parameters are known.

Maybe an UNLIMIT function in IzoneRX and similar restoration tools will become available.  Maybe there already is some rudimentary version of that.  It may even prove useful.  Not holding my breath though.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline EmRR

  • (4)
  • Taperssection Member
  • ***
  • Posts: 661
    • ElectroMagnetic Radiation Recorders
Re: phasing from auto limiter
« Reply #2 on: June 14, 2021, 08:25:00 PM »
Closest possible successful thing would be with a recording that sometimes limits, sometimes doesn't.  You could pull down sections to restore some balance, but it'd be a lot of work, and doesn't sound like what you need. 
Mics: DPA 4060 w/MPS 6030 PSU/DAD6001/DAD4099, Neumann KM 131, KMR 81i, Oktava MK 012, Sennheiser MKH 105, MKH 20, MKH 30, MKH 40, MKH 800 TWIN, lots of other studio appropriate choices
Recorders: Zoom F8n, Sony MZ-R50, portable MOTU based multitrack DAW for client work

 

RSS | Mobile
Page created in 0.026 seconds with 26 queries.
© 2002-2021 Taperssection.com
Powered by SMF