Author Topic: MR-1 Set-up to accept stereo signal (Read 2015 times)

waltmon · « **on:** July 03, 2007, 01:45:43 PM »

...no problems using the included stereo mic into the 2 in-puts, But I cannot figure out how to set up so I can send it stereo signal through 1 of the inputs. I have it set to line in, but only get mono when sending a stereo signal.

HELP!

Fatah Ruark (aka MIKE B) · « **Reply #1 on:** July 03, 2007, 02:05:03 PM »

I believe those are balanced inputs. They are designed to only take one channel, so you can never use one to input stereo.

waltmon · « **Reply #2 on:** July 03, 2007, 02:15:07 PM »

My understanding is during line in mode, you can adjust something in the gain to use only one of the inputs...maybe I am understanding wrong.

So I'll need some funky cables that terminate in mono 3.5mm mini?

mwz · « **Reply #3 on:** July 03, 2007, 02:21:45 PM »

http://www.soundprofessionals.com/cgi-bin/gold/item/SP-KORG-ADAPTER-CABLE
or
http://www.soundprofessionals.com/cgi-bin/gold/category.cgi?item=SP-KORG-BAT-MOD-CABLE&type=store

I used the second one out of the mma6000 the other night, np.

There are a bunch of xlr > 3.5 shorties around, too.

I thought the l/r inputs on the MR1 accept balanced and unbalanced?

Nick's Picks · « **Reply #4 on:** July 05, 2007, 07:30:20 PM »

Quote from: mwz on July 03, 2007, 02:21:45 PM

I thought the l/r inputs on the MR1 accept balanced and unbalanced?

they do. but in MONO either way.

Author Topic: MR-1 Set-up to accept stereo signal (Read 2015 times)

waltmon

MR-1 Set-up to accept stereo signal

Fatah Ruark (aka MIKE B)

Re: MR-1 Set-up to accept stereo signal

waltmon

Re: MR-1 Set-up to accept stereo signal

mwz

Re: MR-1 Set-up to accept stereo signal

Nick's Picks

Re: MR-1 Set-up to accept stereo signal