Topic: Zefiro Inbox / AD-20 pictures ISO...

[Nick's Picks]

Hey all..
I'm in search of a picture of the inside of a Denecke AD-20 / Zefiro Inbox.
Specifically, the info I need to see is the pinout of the XLR inputs in relation to the computer cable that is used to go from there into the PCB.  its a 10pin square plug.  6 of those were for Left/Right input, two were 9v DC power from the battery terminals, and two more were for the low bat light or something.
I need that pinout !!!!
 
a solid picture of the inside, where by I can see where pin 1 is going?
or if someone wants to crack it open and have a peak and report back   Its a 3 screw lid.  off and back on in seconds.

Thanks...

[flipp]

If pin1 is the red stripe, it goes to the negative terminal of the battery.
2 - battery positive
3 - left xlr housing
4 - rt xlr housing
5 - rt xlr pin 1
6 - rt xlr pin 3
7 - rt xlr pin 2
8 - left xlr pin 1
9 - left xlr pin 3
10- left xlr pin 2

< edited to add 2-10; hope that's what you need, if not I'll dig out the digicam >

[Nick's Picks]

excellent !
thank you