Taperssection.com
Gear / Technical Help => Cables => Topic started by: mmadd29 on August 20, 2009, 01:17:07 PM
-
Does anyone know where to get a decent 10' cable of this type. I have looked and can't seem to find anything 10'
-
Get this..
http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10244&cs_id=1024407&p_id=5500&seq=1&format=2
cut it in half and grab one of these
http://www.parts-express.com/pe/showdetl.cfm?Partnumber=092-157
bust out your soldering iron and go to town.. otherwise send 'Darktrain' a message Robb makes some amazing cables!
Neil
-
...or, have Ed at KindKables.com make one for you. ;)
-
...or, have Ed at KindKables.com make one for you. ;)
That's probably the best bet...
-
If I chose to DIY, what type of wire would be used?
Something middle of the road...
-
Does anyone know where to get a decent 10' cable of this type. I have looked and can't seem to find anything 10'
Is this for soundboard patching, by chance?
-
Does anyone know where to get a decent 10' cable of this type. I have looked and can't seem to find anything 10'
Is this for soundboard patching, by chance?
Yes, I was at Peabody's Sunday, and the sound guy only had 1/4 out. All the other places in Cleveland have RCA out. So I need to make a cable, or buy one for Peabody's shows.
-
If you already have a 10'-ish length of cable you use for patching from RCA-out boards, you could just get a couple 1/4 | RCA adapters. For example, if you have a 10' length of 2 x RCA-male > 3.5mm stereo, just get 2 x 1/4"-male | RCA-female adapters.
-
If you already have a 10'-ish length of cable you use for patching from RCA-out boards, you could just get a couple 1/4 | RCA adapters. For example, if you have a 10' length of 2 x RCA-male > 3.5mm stereo, just get 2 x 1/4"-male | RCA-female adapters.
That's exactly what I have for board feeds, then you ready for anything except XLR. You can even get a couple of XLR > RCA adapters and then you ARE ready for anything.
-
Yes, I was at Peabody's Sunday, and the sound guy only had 1/4 out. All the other places in Cleveland have RCA out. So I need to make a cable, or buy one for Peabody's shows.
Your best bet is to use a RCA > 3.5mm cable as your main cable and then get all the adapters you need. Here is a pic I took of all my SBD patch gear:
(http://images47.fotki.com/v1479/photos/4/45607/4783512/IMG_9458-vi.jpg)
-
Your best bet is to use a RCA > 3.5mm cable as your main cable and then get all the adapters you need. Here is a pic I took of all my SBD patch gear:
(http://images47.fotki.com/v1479/photos/4/45607/4783512/IMG_9458-vi.jpg)
Exactly what I do. I have an Altoid tin or two full of adapters. It is much lighter and takes up much less space than multiple sets of cables.
-
Yes, I was at Peabody's Sunday, and the sound guy only had 1/4 out. All the other places in Cleveland have RCA out. So I need to make a cable, or buy one for Peabody's shows.
Your best bet is to use a RCA > 3.5mm cable as your main cable and then get all the adapters you need. Here is a pic I took of all my SBD patch gear:
(http://images47.fotki.com/v1479/photos/4/45607/4783512/IMG_9458-vi.jpg)
Looks like the direction I'll be headed in. I have an entire try of power tips, so what another with audio ends...
Thanks to everyone for the input
-
Don't know if you still need it but I have a Canare one with either generic or Neutrik connectors.
-
Don't know if you still need it but I have a Canare one with either generic or Neutrik connectors.
I went to Guitar center yesterday, and picked up all the adapters, Thanks
-
Don't know if you still need it but I have a Canare one with either generic or Neutrik connectors.
3 posts and 3 solicitations, nice way to come into the community :flipa:
-
Don't know if you still need it but I have a Canare one with either generic or Neutrik connectors.
3 posts and 3 solicitations, nice way to come into the community :flipa:
Sorry, didn't mean to offend you. I legitimately answered 2 questions, in 2 very recent posts, with regards to someone looking for something. One post was asking for proprietors to get in touch with them? If there are any technical questions or experiences I can share/help out with I'll be glad to do it. I think it is just coincidence. :-\
-
3 posts and 3 solicitations, nice way to come into the community :flipa:
To be fair, one (http://taperssection.com/index.php/topic,126112.msg1674451.html#msg1674451) of the three was properly posted in the Retail forum making TSers aware of available product, just like all our other vendors do (including you (http://taperssection.com/index.php/topic,110932.0.html)). And the second (http://taperssection.com/index.php/topic,125940.msg1674434.html#msg1674434) and third (http://taperssection.com/index.php/topic,126097.msg1674427.html#msg1674427) were in response to TSers explicitly asking where they could find a product that theslygoose can provide. Hardly soliciation; more like answering people's questions.
-
3 posts and 3 solicitations, nice way to come into the community :flipa:
To be fair, one (http://taperssection.com/index.php/topic,126112.msg1674451.html#msg1674451) of the three was properly posted in the Retail forum making TSers aware of available product, just like all our other vendors do (including you (http://taperssection.com/index.php/topic,110932.0.html)). And the second (http://taperssection.com/index.php/topic,125940.msg1674434.html#msg1674434) and third (http://taperssection.com/index.php/topic,126097.msg1674427.html#msg1674427) were in response to TSers explicitly asking where they could find a product that theslygoose can provide. Hardly soliciation; more like answering people's questions.
so technically not solicitation, but we can all see where it was going, its not a issue just abrupt and i am feeling like being an ass today