Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: jdawg on November 27, 2004, 02:01:50 PM
-
I've got a 12v PS2 apparently and I tried measuring the output voltage with a meter but I'm not sure where to connect the probes to get the correct voltage. I'm thinking somewhere on the XLR outs, but can't get any readings from them. thanks for any help.
-
I've got a 12v PS2 apparently and I tried measuring the output voltage with a meter but I'm not sure where to connect the probes to get the correct voltage. I'm thinking somewhere on the XLR outs, but can't get any readings from them. thanks for any help.
are you trying to measure the phantom voltage?
Pin1 = ground
Pin2 and 3 should read the same voltage respect to ground.
marc