Hey guys, quick question about the C4's.
Tomorrow night is going to be my 1st time taping, it'll be Rusted Root. I'm wondering what the switch is on the top of my mics, and where it should be when I'm taping. I know I'm a n00b, but help would be pretty sweet.
Thanks guys
-10 Decibel switch, dont use it for rusted root, but something like tool.
It's not always that cut and dry. For example, I run an R4 that has pretty sensative mic-inputs. A lot of folks run line-in to pad the inputs, but that puts something like a 30 db pad on the input, so many times, I'll run mic-in still but use the 10 db pad on the mics instead. That allows me to only pad my signal by 10 instead of 30 and run mic-in with less gain (and thus less noise). So, it kind of depends on your application...