Become a Site Supporter and Never see Ads again!

Author Topic: km140 windscreens?  (Read 8504 times)

0 Members and 1 Guest are viewing this topic.

Offline Nick Graham

  • Amorican
  • Trade Count: (3)
  • Needs to get out more...
  • Posts: 4068
  • Gender: Male
km140 windscreens?
« on: June 18, 2004, 05:48:08 PM »
My new 140s are at home waiting on me (yee ha!), so I guess
I could just wait and figure it out myself in an hour or so, but
figured I'd ask here....

Will the DPA screens fit Neumanns? If not, any suggestions?

+T to whoever can help....
Right now nothing...in the past: Schoeps CMC6, AKG 480, AKG 460, AKG 414, MBHO 603a, Neumann KM100, ADK TL>Schoeps MK4, Schoeps MK2, Schoeps MK41, AKG ck61, AKG ck62, AKG ck63, Neumann AK40, Neumann AK50, MBHO ka200>Lunatec V2, Lunatec V3, Apogee Mini-Me, Oade M148, Oade M248, Sound Devices MP2, Sonosax SXM2>Sony (mod)SBM1, Apogee AD500>D7, D8, D100, M1, R1, R4, R09, iRiver HP120, Microtrack

Offline Joe w.

  • esniper
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5034
  • Gender: Male
  • Turn JB Up
Re: km140 windscreens?
« Reply #1 on: June 18, 2004, 06:04:13 PM »
welcome to the team.  ;D

I use the dpa screens and they fit fine......not too good when taping in a hurricane at bonnaroo, however :P

Lee w. gave me a set of akg screens that come with the akg caps....the small ones, they work fine in smoky places. I also run the neumann smokescreens that come with the 140 set. w
2016 National Champions
five generations with an unlocked door and a loaded burglar alarm

Offline Nick Graham

  • Amorican
  • Trade Count: (3)
  • Needs to get out more...
  • Posts: 4068
  • Gender: Male
Re: km140 windscreens?
« Reply #2 on: June 18, 2004, 06:11:52 PM »
Thank ya sir...

+T accounted for...
Right now nothing...in the past: Schoeps CMC6, AKG 480, AKG 460, AKG 414, MBHO 603a, Neumann KM100, ADK TL>Schoeps MK4, Schoeps MK2, Schoeps MK41, AKG ck61, AKG ck62, AKG ck63, Neumann AK40, Neumann AK50, MBHO ka200>Lunatec V2, Lunatec V3, Apogee Mini-Me, Oade M148, Oade M248, Sound Devices MP2, Sonosax SXM2>Sony (mod)SBM1, Apogee AD500>D7, D8, D100, M1, R1, R4, R09, iRiver HP120, Microtrack

Offline Nick Culbreth

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3084
  • Gender: Male
Re: km140 windscreens?
« Reply #3 on: June 18, 2004, 06:46:32 PM »
i'll second the dpa windscreens... hope the mics treat you well.  :)

Offline Joe w.

  • esniper
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5034
  • Gender: Male
  • Turn JB Up
Re: km140 windscreens?
« Reply #4 on: June 18, 2004, 08:18:13 PM »
they sound sweet up close and ortf. I'l post a pic of how to run em din with the ortf/xy mount. really nice din as well.
2016 National Champions
five generations with an unlocked door and a loaded burglar alarm

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re: km140 windscreens?
« Reply #5 on: June 18, 2004, 08:29:40 PM »
Per the archives, if you want super duper wind protection the big-ass Shure A81WS fit as well.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline Nick Graham

  • Amorican
  • Trade Count: (3)
  • Needs to get out more...
  • Posts: 4068
  • Gender: Male
Re: km140 windscreens?
« Reply #6 on: June 18, 2004, 08:58:38 PM »
Ahhh...you mean the Shures I just sold cause I didn't think they'd fit the Neumanns?

 ::)

+T for all the help, and I'd give myself a -T if I could...
Right now nothing...in the past: Schoeps CMC6, AKG 480, AKG 460, AKG 414, MBHO 603a, Neumann KM100, ADK TL>Schoeps MK4, Schoeps MK2, Schoeps MK41, AKG ck61, AKG ck62, AKG ck63, Neumann AK40, Neumann AK50, MBHO ka200>Lunatec V2, Lunatec V3, Apogee Mini-Me, Oade M148, Oade M248, Sound Devices MP2, Sonosax SXM2>Sony (mod)SBM1, Apogee AD500>D7, D8, D100, M1, R1, R4, R09, iRiver HP120, Microtrack

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re: km140 windscreens?
« Reply #7 on: June 18, 2004, 09:01:51 PM »
Ahhh...you mean the Shures I just sold cause I didn't think they'd fit the Neumanns?

You mean you didn't try 'em first?  Doh!!  They're a touch looser than the DPAs on the KM140s, but work very well IME.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline JAH

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 784
  • The kids they dance, they shake their bones!
Re: km140 windscreens?
« Reply #8 on: June 21, 2004, 02:54:54 PM »
I run the shure A81ws outside and the small dpa's inside...one day might get the middle of the road DPA's (middle btw small dpa's and the shure's).  BUT the shure's work great and eat the entire capsule. ;)  Only reason to get the better DPS screens is to use under windy sheds when stealthing, else the shure's can't be beat.  I found I like the stock 460 screens better than the stock 184 screen and only assume the stock 140 screens are comparable to the 184 screens....my 140's didn't come w/ stock screens...had the baby dpa's.

JAH
Taping, it's a team sport!
km140/150>M148>mme or msbm-1
...yes screwdriver impaired
modified akg 461/2/ck8
iH120...and a slew of dat decks ;-(

Offline Lil Kim Jong-Il

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 6498
  • large Marge sent me
Re: km140 windscreens?
« Reply #9 on: June 21, 2004, 03:56:42 PM »
The DPAs work great with 140s.  But they are too big for low profile work (not stealth, but just low profile indoor work.)

I've seen some very small windscreens that are barely more than a foam cover for the AKxx caps.  They would not stop wind, but would keep smoke off the capsules.  They are smaller than the little neumann screens (the ones that ship with 184s), which are worthless for wind anyway. 

Anyone seen them or know where to get them?
The first rule of amateur neurosurgery club is .... I forget.

Offline JAH

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 784
  • The kids they dance, they shake their bones!
Re: km140 windscreens?
« Reply #10 on: June 21, 2004, 04:00:46 PM »
The DPAs work great with 140s.  But they are too big for low profile work (not stealth, but just low profile indoor work.)

I've seen some very small windscreens that are barely more than a foam cover for the AKxx caps.  They would not stop wind, but would keep smoke off the capsules.  They are smaller than the little neumann screens (the ones that ship with 184s), which are worthless for wind anyway. 

Anyone seen them or know where to get them?
get the small DPA screens..they work fine for stealthing and low wind.  they are actually kind of small for the 140's....

jah
Taping, it's a team sport!
km140/150>M148>mme or msbm-1
...yes screwdriver impaired
modified akg 461/2/ck8
iH120...and a slew of dat decks ;-(

Offline silentmark

  • Shine with or without cherries ?
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 2685
  • Gender: Male
  • Boat, cucumber, wire ...
Re: km140 windscreens?
« Reply #11 on: June 22, 2004, 02:02:58 PM »
they sound sweet up close and ortf. I'l post a pic of how to run em din with the ortf/xy mount. really nice din as well.

Can you post that picture ? I was toying around with making a DIN bar for the mount, but I never tried to combine the ortf/xy bars, hmmmmmmm ... Regardless post the image if ya could ... Oh I use the big ball neumann windscreens outdoors and they work better than the DPA's imo ...
Dissent is the highest form of patriotism. - Howard Zinn, not Thomas Jefferson ...

Mics: Neumann AK50/AK40/AK30/AK20(1 for M/S), AKG568eb's (gathering dust)
Decks: R-44 (OCM), Fostex FR2LE (OWM), Microtacker (semi-retired), D8 (retired), D7 (retired)
Pre-amps: Apogee Minime (semi-retired), Sonosax SX-M2 (semi-retired), Oade mod SBM-1 (retired)
Cables: LC3 actives (older lemo style x2), Audio Magic Hyper Conductor interconnects

http://www.youtube.com/watch?v=J3qrWOOposQ

Offline Joe w.

  • esniper
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5034
  • Gender: Male
  • Turn JB Up
Re: km140 windscreens?
« Reply #12 on: June 22, 2004, 03:22:36 PM »
no sweat mark. i'll post it tonight.
2016 National Champions
five generations with an unlocked door and a loaded burglar alarm

Offline silentmark

  • Shine with or without cherries ?
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 2685
  • Gender: Male
  • Boat, cucumber, wire ...
Re: km140 windscreens?
« Reply #13 on: June 22, 2004, 03:31:24 PM »
no sweat mark. i'll post it tonight.

Right on Joe, thanks ...
Dissent is the highest form of patriotism. - Howard Zinn, not Thomas Jefferson ...

Mics: Neumann AK50/AK40/AK30/AK20(1 for M/S), AKG568eb's (gathering dust)
Decks: R-44 (OCM), Fostex FR2LE (OWM), Microtacker (semi-retired), D8 (retired), D7 (retired)
Pre-amps: Apogee Minime (semi-retired), Sonosax SX-M2 (semi-retired), Oade mod SBM-1 (retired)
Cables: LC3 actives (older lemo style x2), Audio Magic Hyper Conductor interconnects

http://www.youtube.com/watch?v=J3qrWOOposQ

Offline Joe w.

  • esniper
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5034
  • Gender: Male
  • Turn JB Up
Re: km140 windscreens?
« Reply #14 on: June 22, 2004, 07:15:04 PM »
if you slide the little washer under the last mount on the right, it will stay put in din.
right at 20cm




« Last Edit: June 22, 2004, 07:19:39 PM by Joe w. »
2016 National Champions
five generations with an unlocked door and a loaded burglar alarm

 

RSS | Mobile
Page created in 0.061 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF