Become a Site Supporter and Never see Ads again!

Author Topic: Microphone Stand Preference?  (Read 7155 times)

0 Members and 1 Guest are viewing this topic.

Offline cgrooves

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 804
  • Gender: Male
  • Get On the Bus -Busman Audio
Re: Microphone Stand Preference?
« Reply #30 on: August 06, 2005, 01:01:45 AM »
Quote
I just measured my 3336...closed position is 39 1/2".

...I still think that's "not too bulky," but it's just me.

EDIT:  Funny that the Bogen chart says that the folded up length is 59".  Either I can't read my label on my stand or the guy I got this from modded it.

Weird.
Quote

I ran into this same issue when I purchased my 3336 too. One site had it listed as 59" closed and another site had it listed as 39.5" closed. Ended up purchasing from the cheaper site, which reported it as 59" closed and sweated it out (preparing to send it back) until it arrived at a closed lenght of 39.5". I informed the vendor of the mistake, but it appears that it still hasn't been corrected on the Bogen charts. They have probably missed several sales opportunities because of this misinformation.
AUDIO:
Open:  Busman Audio BSC1-(K1/K2/K3/K4) > Fostex FR-2LE (Busman T Mod) 
                       
Unopen:  AudioReality Omni Mics (Panasonic capsules)> AudioReality Battery Box (depending on SPL's) > iRiver H140 w/ Rockbox

VISUAL:
Canon 7D, Canon 50mm/1.8, Canon 85mm/1.8, Tamron 17-50mm/2.8, Tamron 70-200mm/2.8

Offline coloartist

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2067
  • MGoldey -"you can shove those mics up your ass
Re: Microphone Stand Preference?
« Reply #31 on: August 06, 2005, 01:42:39 AM »
Nope, I didn't get one from the auctions. I kept raising my bid, and then ran out of time. It seemed like he has alot more auctions coming up, so I didn't really worry about it to much. I am still trying to figure out which stand goes 9'-11' or so high, and is short enough folded up to go on my taping  gearpack (Mountainsmith Camera Pack). It holds a tripod on each side.
mk4>Kwon/din a/din>kc5>cmc6>kindkables XLR>788T
mk22>Kwon/NOS>kc5>cmc6>kindkablesXLR>788t                                                     
Canon XH-A1 Sony AX100                       
Samsung Backlit LED 55">Pioneer Elite SC-27>Snell Acoustics E.5  Series

Offline fozzy

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 3810
  • Gender: Male
  • move along, nothing much to see here
Re: Microphone Stand Preference?
« Reply #32 on: August 07, 2005, 01:12:35 AM »
Nope, I didn't get one from the auctions. I kept raising my bid, and then ran out of time. It seemed like he has alot more auctions coming up, so I didn't really worry about it to much. I am still trying to figure out which stand goes 9'-11' or so high, and is short enough folded up to go on my taping  gearpack (Mountainsmith Camera Pack). It holds a tripod on each side.


maybe i missed it but what are the dimensions it holds?
MK 4V > KCY 250/5 Ig (KS 10I)  > VST62IUg > 722

Offline coloartist

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2067
  • MGoldey -"you can shove those mics up your ass
Re: Microphone Stand Preference?
« Reply #33 on: August 07, 2005, 05:46:46 PM »


It is 22" tall, but I could easily go to 28"-30", without to much sticking out the top.
mk4>Kwon/din a/din>kc5>cmc6>kindkables XLR>788T
mk22>Kwon/NOS>kc5>cmc6>kindkablesXLR>788t                                                     
Canon XH-A1 Sony AX100                       
Samsung Backlit LED 55">Pioneer Elite SC-27>Snell Acoustics E.5  Series

 

RSS | Mobile
Page created in 0.04 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF