Taperssection.com

Gear / Technical Help => Remote Power => Topic started by: H₂O on April 02, 2009, 10:34:19 AM

Title: ISO: Charger Specs for BG 10-14-88 or 10-14-100
Post by: H₂O on April 02, 2009, 10:34:19 AM

I seemed to have misplaced my charger for my Battery Geek 10-14-88 and need to know the DC specs for the Charger.

What is the Voltage and Current of the charger?

Title: Re: ISO: Charger Specs for BG 10-14-88 or 10-14-100
Post by: H₂O on April 05, 2009, 10:30:41 PM

anybody?

Title: Re: ISO: Charger Specs for BG 10-14-88 or 10-14-100
Post by: WiFiJeff on April 06, 2009, 11:11:00 AM

I have the 10-14-88 and the charger has an output of 12 V and 2 Amp.  It has very flexible input, 100-240V at 47-63 Hz, with 1.2 Amp maximum draw.  Center of the output jack positive.

Jeff

Title: Re: ISO: Charger Specs for BG 10-14-88 or 10-14-100
Post by: H₂O on April 12, 2009, 08:17:42 PM

Thanks for the response.  Do you have a picture of it (in case it's in plain site and I am missing it)?

Title: Re: ISO: Charger Specs for BG 10-14-88 or 10-14-100
Post by: WiFiJeff on April 13, 2009, 12:50:55 PM

It's just a rectagular box (4"x1.5"x1") with an AC cord coming out of one end and a cord to the battery input jack on the other, saying "Power Supply" on it.  I stuck a Battery Geek label on it so I'd remember what it was for.

Jeff

Title: Re: ISO: Charger Specs for BG 10-14-88 or 10-14-100
Post by: H₂O on May 07, 2009, 09:59:24 PM

Can you post a photo of the PS and the label on it as well?

Title: Re: ISO: Charger Specs for BG 10-14-88 or 10-14-100
Post by: busterr on May 12, 2009, 10:53:59 AM

Here's a few shots of it for you...

The 2nd pic shows the small light/led that I usually look for.

Title: Re: ISO: Charger Specs for BG 10-14-88 or 10-14-100
Post by: H₂O on May 12, 2009, 02:01:29 PM

Thanks!